Simple strain enhancement: Piezoelectric materials are important as sensors and transducers for applications such as ultrasonics. Liu et al. discovered nanopillar regions in a sodium-niobium-oxide film that substantially improve the piezoelectric properties (see the Perspective by Bassiri-Gharb). These nanopillar regions reverse where the cations and anions are located in the crystal structure, with a distinctive boundary in between. This difference in structure results in a strain-sensitive polarity that enhances the piezoelectric properties in a chemically simple material. Science this issue p. 292 ; see also p. 252
A soft-templating hydrothermal approach is developed for synthesizing nitrogen (N)-doped mesoporous carbon. D-Fructose and dicyandiamide (DCDA) are used as the starting materials for carbon and nitrogen precursors, respectively, and Pluronic® F127 as the soft template. N-doped mesoporous carbon shows a significant improvement in electrical conductivity and specific capacitance (212 F g−1 under 1 mV s−1 scan rate), compared with the un-doped carbon derived from the same process. A tunable N-doping level (from 4.5 to 14.5 wt%) and specific surface area (ranging from 375 to 730 m2 g−1) are realized by changing the DCDA to D-Fructose weight ratio. The three factors that affect the electrochemical performance, including the specific surface area, electrical conductivity and pseudocapacitance, have been systematically studied. Doping of 6.0 wt% N into carbon appears to be the optimum level for obtaining high electrochemical capacitance. In this work, the effects of N-doping and the interactions among the three factors affecting the capacitance are clarified, shedding light on the future work on the rational design of electrode materials for improved electrochemical performance.
Lead-free bilayered thin films consisting of (BFO) and (BNT) nanolayers were deposited on the substrate by radio frequency sputtering. The bilayered BFO/BNT film exhibits a strong (111) orientation and much enhanced ferroelectric and magnetic properties ( , , , and ) as compared to those of the single layer BNT and BFO thin films, together with an almost fatigue-free polarization behavior. Although space charges occur at the interface between the constituent nanolayers, as confirmed by the frequency dispersion of capacitance, the bottom BNT nanolayer appears to promote the growth and crystallization of BFO layer, largely responsible for the observed ferroelectric and magnetic behavior.