The hybrid simulation (HS) testing method combines physical test and numerical simulation, and provides a viable alternative to evaluate the structural seismic performance. Most studies focused on the accuracy, stability and reliability of the HS method in the small-scale tests. It is a challenge to evaluate the seismic performance of a twelve-story pre-cast reinforced concrete shear-wall structure using this HS method which takes the full-scale bottom three-story structural model as the physical substructure and the elastic non-linear model as the numerical substructure. This paper employs an equivalent force control (EFC) method with implicit integration algorithm to deal with the numerical integration of the equation of motion (EOM) and the control of the loading device. Because of the arrangement of the test model, an elastic non-linear numerical model is used to simulate the numerical substructure. And non-subdivision strategy for the displacement inflection point of numerical substructure is used to easily realize the simulation of the numerical substructure and thus reduce the measured error. The parameters of the EFC method are calculated basing on analytical and numerical studies and used to the actual full-scale HS test. Finally, the accuracy and feasibility of the EFC-based HS method is verified experimentally through the substructure HS tests of the pre-cast reinforced concrete shear-wall structure model. And the testing results of the descending stage can be conveniently obtained from the EFC-based HS method.

This paper presents an improved numerical model for the reliability analysis of corrosion initiation due to the combined action of carbonation and chloride ingress. The coupled mechanism of carbon dioxide, chloride ions, heat and moisture is considered in the model. The probability of corrosion initiation is evaluated by means of a single limit state function in which the critical concentration of chloride ions depends on the degree of carbonation. In addition, the coupled diffusion coefficients are interpolated linearly depending on the degree of carbonation in order to simplify the structure of the model without compromising accuracy.

In some extreme corrosion environments, the erosion of chloride ions and carbon dioxide can occur simultaneously, causing deterioration of reinforced concrete (RC) structures. This study presents a probabilistic model for the sustainability prediction of the service life of RC structures, taking into account that combined deterioration. Because of the high computational cost, we also present a series of simplifications to improve the model. Meanwhile, a semi-empirical method is also developed for this combined effect. By probabilistic generalization, this simplified method can swiftly handle the original reliability analysis which needs to be based on large amounts of data. A comparison of results obtained by the models with and without the above simplifications supports the significance of these improvements.

A chemo-damage model is proposed to predict the expansion caused by the alkali silica reaction (ASR). The model covers the formation of the pre-expansion gel driven by alkali and the swelling of the gel driven by water. The swelling capacity of the ASR gel is quantified by the sodium to calcium ratio in the pore solution. The bound alkali in the gel recycled by calcium is also considered in this model. Both external alkali supply and internal alkali released from aggregates are included. Several sets of experimental data are compared with the simulation results for the verification of the model.