Plane-strain motion of a flexural seismic metasurface in the form of a regular array of thin Kirchhoff plates attached to the surface of an elastic half-space is analysed. Two types of contact conditions, including simply supported plates and plates moving along horizontal rails are studied. Dispersion of time harmonic waves is investigated both asymptotically and numerically. A major effect of the contact conditions on metasurface behaviour is discovered. In particular, it is shown that frequency band gaps are not the feature of the array composed of simply supported plates. It is also demonstrated that the scaling laws, expressed through geometric and material problem parameters, drastically differ from each other for two considered setups.
23 May 2024 in Zeitschrift für angewandte Mathematik und Physik
The mathematical formulations for transverse compression of a thin elastic disc are considered, including various boundary conditions along the faces of the disc. The mixed boundary conditions corresponding to the loading by normal stresses in absence of sliding are studied in detail. These conditions support an explicit solution in a Fourier series for the boundary layers localised near the edge of the disc and also do not assume making use of the Saint-Venant principle underlying the traditional asymptotic theory for thin elastic structures. As an example, an axisymmetric problem is studied. Along with the leading order solution for a plane boundary layer, a two-term outer expansion is derived. The latter is expressed through the derivatives of the prescribed stresses. Generalisations of the developed approach are addressed.
26 July 2024 in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
The experimental-numerical-analytical methodology, based on a simple non-standard falling weight experiment, was used to investigate the influence of weight on climbing ropes’ response. Analysis of the impact force, deformation of rope, dissipated and retrieved energy, and maximum deceleration showed that the weight of the climber significantly affects all the examined physical quantities and, consequently, climbers’ safety. Smaller falling mass generates smaller maximum force, dissipates less energy, and generates smaller retrieved energy that propels climbers in the opposite vertical direction. However, maximum deceleration, considered to be one of the most important safety indicators, exhibits non-monotonic dependence on weight. In indoor climbing, these results might aid instructors in introducing measures to help in the traceability of the use of ropes regarding climbers’ weight.