Thermochemical treatment is rapidly emerging as an alternative method for the management of stabilised sewage sludges (biosolids) to effectively reduce waste volume, degrade contaminants, and generate valuable products, particularly biochar and hydrochar. Biosolids-derived char has a relatively high concentration of heavy metals compared with agricultural chars but is still applied to land due to its beneficial properties and ability to retain metals. However, non-agricultural applications can provide additional economic and environmental benefits, promote sustainability and support a circular economy. This review identifies extensive non-agricultural opportunity for biosolids biochar, including adsorption, catalysis, energy storage systems, biological process enhancement, and as additives for rubber compounding and construction. Biosolids chars have received limited attention vs agricultural char, and we draw on both areas of literature, as well as evaluating differences between agricultural and biosolids chars. A key opportunity for biosolids biochar in comparison with other materials and agricultural chars is its sustainable and low-cost nature, relatively high metals content, improving catalyst properties, and ability to modify in various stages to tune it to specific applications. The specific opportunities for hydrochar have only received limited attention. Research needs to include better understanding of the benefits and limitations for specific applications, as well as adjacent drivers, including society, regulation, and market and economics.

Per- and polyfluoroalkyl substances (PFAS) are a group of fluorinated synthetic chemicals that are highly recalcitrant, toxic, and bio-accumulative and have been detected in biosolids worldwide, posing potential risks to humans and the environment. Recent studies suggest that the organic C-F bond in PFAS can be destructed and potentially mineralised into inorganic fluorides during thermal treatment. This study focuses on thermodynamic equilibrium investigations and the fate of fluorine compounds post-PFAS destruction during biosolid thermal treatment. The results indicate that gas-phase fluorine compounds are mainly hydrogen fluoride (HF) and alkali fluorides, whereas solid-phase fluorine compounds include alkaline earth fluorides and their spinels. High moisture and oxygen content in the volatiles increased the concentration of HF in the gas phase. However, adding minerals reduced the emission of HF in the gas phase significantly and enhanced the capture of fluorine as CaF₂ spinel in the solid phase. This study also investigates the effect of feedstock composition on the fate of fluorine. High ash content and low volatile matter in the feedstock reduced HF gas emissions and increased fluorine capture in the solid product. The findings of this work are useful in designing thermal systems with optimised operating conditions for minimising the release of fluorinated species during the thermal treatment of PFAS-containing biosolids.

This work demonstrates the feasibility of using biochars derived from a variety of waste feedstocks, such as food organics and garden organics (FOGOs), garden organics (GOs), and biosolids (BSs), provided by Barwon Water (BW) and South East Water (SEW), as active electrode material for supercapacitor application. Four different biochars were produced by the co-pyrolysis of pre-treated mixed waste feedstocks, which were fabricated into a two-electrode symmetric supercapacitor set-up to evaluate their energy storage potential. Two different approaches, (i) carbon nanoparticle coating/modification and (ii) thermochemical activation, were employed to improve the electrochemical properties of the biochars. Potassium hydroxide-activated biochar derived from BW’s triple waste feedstock mixture (comprising 70% GOs, 20% FOGOs, and 10% BSs) demonstrated the highest specific capacitance (30.33 F/g at 0.1 A/g), energy density (4.21 Wh/kg), and power density (2.15 kW/kg) among the tested samples. Such waste-derived biochar offers several benefits for energy storage, including cost-efficiency and sustainable alternatives to traditional electrode materials. The biochar’s electrochemical performance can be further improved by improving the feedstock quality by different pre-treatments.