Hexagonal boron nitride (h-BN) is well-established as a requisite support, encapsulant and barrier for 2D material technologies, but also recently as an active material for applications ranging from hyperbolic metasurfaces to room temperature single-photon sources. Cost-effective, scalable and high quality growth techniques for h-BN layers are critically required. We utilise widely-available iron foils for the catalytic chemical vapour deposition (CVD) of h-BN and report on the significant role of bulk dissolved species in h-BN CVD, and specifically, the balance between dissolved oxygen and carbon. A simple pre-growth conditioning step of the iron foils enables us to tailor an error-tolerant scalable CVD process to give exceptionally large h-BN monolayer domains. We also develop a facile method for the improved transfer of as-grown h-BN away from the iron surface by means of the controlled humidity oxidation and subsequent rapid etching of a thin interfacial iron oxide; thus, avoiding the impurities from the bulk of the foil. We demonstrate wafer-scale (2″) production and utilise this h-BN as a protective layer for graphene towards integrated (opto-)electronic device fabrication.
12 November 2020 in The Journal of Chemical Physics
The chemical functionalization of graphene nanomaterials allows for the enhancement of their properties for novel functional applications. However, a better understanding of the functionalization process by determining the amount and location of functional groups within individual graphene nanoplatelets remains challenging. In this work, we demonstrate the capability of tip-enhanced Raman spectroscopy (TERS) to investigate the degree and spatial variability of the appearance of disorder in graphitic nanomaterials on the nanoscale with three different levels of nitrogen functionalization. TERS results are in excellent agreement with those of confocal Raman spectroscopy and chemical analysis, determined using x-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry, of the functionalized materials. This work paves the way for a better understanding of the functionalization of graphene and graphitic nanomaterials at the nano-scale, micro-scale, and macro-scale and the relationship between the techniques and how they relate to the changes in material properties of industrial importance.
Graphene is a desirable material for next generation technology. However, producing high yields of single-layer flakes with industrially applicable methods is currently limited. We introduce a combined process for the reduction of graphene oxide (GO) via vitamin C (ascorbic acid) and thermal annealing at temperatures of <150 °C for times of <10 minutes, resulting in electrically conducting thin films with sheet resistances reducing by 8 orders of magnitude to as low as ∼1.3 kΩ □−1, suitable for microelectronics, display technology and optoelectronic applications. The in-depth physicochemical characterisation of the products at different stages of GO preparation and reduction allows for further understanding of the process and demonstrates the suitability for industrial production methodologies due to an environmentally-friendly reducing agent, solution processability and no requirement for high temperatures. The presence of the vitamin C lowers the temperature required to thermally reduce the GO into an electrically conducting thin film, making the technique suitable for thermally sensitive substrates, such as low melting point polymers. Simultaneous spray coating and reduction of GO allows for large area deposition of conductive coatings without sacrificing solution processability, often lost through particle agglomeration, making it compatible with industrial processes, and applicable to, for example, the production of sensors, energy devices and flexible conductive electrodes for touchscreens.
Electrospun nanofibrous mats, consisting of chitosan (CS) and polyvinylpyrrolidone (PVP), were constructed with the addition of graphene oxide (GO) for enhancement of delivery of the 5-Fluorouracil (5-Fu) chemotherapy drug. Upon studying the range of GO concentrations in CS/PVP, the concentration of 0.2% w/v GO was chosen for inclusion in the drug delivery model. SEM showed bead-free, homogenous fibres within this construct. This construct also proved to be non-toxic to CaCo-2 cells over 24 and 48 h exposure. The construction of a drug delivery vehicle whereby 5-Fu was loaded with and without GO in various concentrations showed several interesting findings. The presence of CS/PVP was revealed through XPS, FTIR and Raman spectroscopies. FTIR was also imperative for the analysis of 5-Fu while Raman exclusively highlighted the presence of GO in the samples. In particular, a detailed analysis of the IR spectra recorded using two FTIR spectrometers, several options for determining the concentration of 5-Fu in composite fibre systems CS/PVP/5-Fu and GO/CS/PVP/5-Fu were demonstrated. By analysis of Raman spectra in the region of D and G bands, a linear dependence of ratios of integrated intensities of AD and AG on the intensity of host polymer band at 1425 cm−1 vs. GO content was found. Both methods, therefore, can be used for monitoring of GO content and 5-Fu release in studied complex systems. After incorporating the chemotherapy drug 5-Fu into the constructs, cell viability studies were also performed. This study demonstrated that GO/CS/PVP/5-Fu constructs have potential in chemotherapy drug delivery systems.