Bamboo is known for its ability to grow at a high speed, with strong sustainability indicators and remarkable strength properties. However, despite these qualities, the practice of designing bamboo structures is still in its early stages in many regions. This paper aims to review the current approaches to structural analysis and design for bamboo structures as found in the existing literature. Through this comprehensive review, this study seeks to identify existing research gaps and areas that require further exploration. The limited design philosophy for bamboo structures can be attributed to the scarcity of studies on the characteristics and mechanics of bamboo material. These findings highlight the necessity for more comprehensive guidelines and standards to enhance the structural analysis and design of bamboo structures. This study identifies gaps in the following areas: lack of consideration for bamboo fiber distribution, lack of guidelines for load parameters specific to bamboo structures, inadequate coverage of bamboo culm connections, inadequate coverage on connection stiffness, limited scope on connection types, and species-specific limitations in standards.
In the event of a typhoon, the majority of houses suffer from large amounts of damage because they were not built with typhoon resilience in mind. For instance, the Philippines is one of the world’s most vulnerable countries to typhoons. Often, roof structures are ripped off during typhoons with average or more vigorous wind gustiness, and houses are easily ruined. This situation led us to search for the appropriate building orientation and roof angle of single-family residential houses through simulations using MATLAB’s genetic algorithm (GA) and SolidWorks’ computational fluid dynamics (CFD). The GA provides the set of design points, while CFD generates a fitness score for each design point. The goal of the optimization is to determine the orientation and roof angle while minimizing the drag force along the direction of a constant wind speed (315 km/h). The lower and upper bounds for house orientation are 0 and 90, respectively; the roof angle is between 3 and 60. After 100 generations, the GA converged to values equal to an 80 orientation and 11 roof angle. The final results provide a good standpoint for future experiments on physical structures.