Basalt, which is a geological medium used for engineering construction in Southwest China, contains defect structures at various scales. In particular, the widespread presence of mesoscale hidden joints significantly affects the mechanical properties of basalt and the stability of engineering structures. However, research in this specific subject has been limited. Hence, this study focused on basalt found in the Baihetan Hydropower Station and systematically explored the size effect of the tensile mechanical behavior of basalt with hidden joints. The investigation was based on a synthetic rock mass (SRM) model that combines the micro-discrete fracture network (μDFN) method and finite-discrete element method (FDEM), providing in-depth insights into the multiscale fracture mechanism of basalt. The results showed that: (1) the μDFN–FDEM model generated based on the statistical geometric parameters of hidden joints could accurately consider the real meso-structural characteristics of basalt, successfully replicating the mechanical behavior observed in laboratory tests and engineering sites. (2) The representative elementary volume (REV) size of basalt rock blocks containing hidden joints was approximately 0.5 m. With an increase in the sample size, the stress–strain curve characteristics under Brazilian disc splitting transitioned from a single-peak shape to a zigzag shape and then to a multi-peak shape, and the failure modes also shifted from single-center splitting failure to local structure-controlled failure and ultimately to a multicenter splitting failure.
Basalt is an important geotechnical material for engineering construction in Southwest China. However, it has complicated structural features due to its special origin, particularly the widespread occurrence of hidden cracks. Such discontinuities significantly affect the mechanical properties and engineering stability of basalt, and related research is lacking and unsystematic. In this work, taking the underground caverns in the Baihetan Hydropower Station as the engineering background, the size-dependent mechanical behaviors and excavation responses of basalt with hidden cracks were systematically explored based on a synthetic rock mass (SRM) model combining the finite-discrete element method (FDEM) and discrete fracture network (DFN) method. The results showed that: (1) The DFN–FDEM model generated based on the statistical characteristics of the geometric parameters of hidden cracks can consider the real structural characteristics of basalt, whereby the mechanical behaviors found in laboratory tests and at the engineering site could be exactly reproduced. (2) The representative elementary volume (REV) size of basalt blocks containing hidden cracks was 0.5 m, and the mechanical properties obtained at this size were considered equivalent continuum properties. With an increase in the sample dimensions, the mechanical properties reflected in the stress–strain curves changed from elastic–brittle to elastic–plastic or ductile, the strength failure criterion changed from linear to nonlinear, and the failure modes changed from fragmentation failure to local structure-controlled failure and then to splitting failure. (3) The surrounding rock mass near the excavation face of underground caverns typically showed a spalling failure mode, mainly affected by the complex structural characteristics and high in situ stresses, i.e., a tensile fracture mechanism characterized by stress–structure coupling. The research findings not only shed new light on the failure mechanisms and size-dependent mechanical behaviors of hard brittle rocks represented by basalt but also further enrich the basic theory and technical methods for multi-scale analyses in geotechnical engineering, which could provide a reference for the design optimization, construction scheme formulation, and disaster prevention of deep engineering projects.