Perovskite-type structures have unique crystal architecture and chemical composition, which make them highly attractive for the design of solar cells. For instance, perovskite-based solar cells have been shown to perform better than silicon cells, capable of adsorbing a wide range of light wavelengths, and they can be relatively easily manufactured at a low cost. Importantly, the perovskite-based structures can also adsorb a significant amount of hydrogen atoms into their own structure; therefore, perovskite holds promise in the solid-state storage of hydrogen. It is widely expected by the scientific community that the controlled adsorption/desorption of the hydrogen atoms into/from perovskite-based structures can help to overcome the main hydrogen storage issues such as a low volumetric density and the safety concerns (i.e., the hydrogen embrittlement affects strongly the mechanical properties of metals and, as such, the storage or transport of the gaseous hydrogen in the vessels is, especially for large vessel volumes, challenging). The purpose of this review is to provide an updated overview of the recent results and studies focusing on the perovskite materials used for both solar cells and hydrogen storage applications. Particular attention is given to (i) the preparation and the achievable efficiency and stability of the perovskite solar cells and (ii) the structural, thermodynamic, and storage properties of perovskite hydrides and oxides. We show that the perovskite materials can not only reach the efficiency above current Si-based solar cells but also, due to good stability and reasonable price, can be preferable in the solid-state storage of hydrogen. Then, the future trends and directions in the research and application of perovskite in both solar cells and hydrogen storage are also highlighted.
20 August 2025 in ACS Applied Materials & Interfaces
Hybrid perovskites are a class of thin-film semiconductors with remarkably steep absorption edges and high absorption coefficient. In the case of solar cells, a film thickness of less than a micrometer is usually sufficient to absorb most of the light when combined with a back reflector. Otherwise, an efficient light trapping strategy may be desired, e.g., in the case of tandem or semitransparent cells. Traditionally, light trapping is accomplished by employing randomly nanotextured substrates. In this contribution, absorption enhancements due to not only nanorough but also microrough substrates and with or without additional gold coating are evaluated from the point of gains in photocurrent and from the point of view of valid optical models. We find that light trapping from nanotextured substrates follows mainly the Yablonovitch model, leading to an apparent shift of absorption edge. This contrasts with microrough substrates and also the remarkable efficient light trapping capabilities of bare layers due to their native surface roughness, where the path enhancement in this case is almost uniform, making the layer optically thicker by factor two or more. Light trapping optical models as well as analytical techniques are reviewed, and new insights are presented.