Rahul Samyal

Dr. Rahul Samyal


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2021 in Materials Research Express
Verified
Journal Article
Open access
RSRahul Samyal
Rahul Samyal
ABAshok Kumar Bagha
Ashok Kumar Bagha
RBRaman Bedi
Raman Bedi
SBShashi Bahl
Shashi Bahl
Kuldeep SAXENAKuldeep SAXENA
Kuldeep SAXENA
Shankar SehgalShankar Sehgal
Shankar Sehgal
In this paper, the modal-model of the composite structure is predicted and viewed to decide the optimal position of the PZT sensors on the composite structures. The novelty of this work is to systematically study the effect of fiber orientations and boundary conditions on the modal-model and the optimal location of the PZT sensors on the composite structures. The glass fibers are reinforced in a polyester matrix at different fiber orientations such as 0°, 30°, 45°, 60° and 90°. It is used for various engineering applications, especially in the aerospace and automobile sector, and it is very important to measure its dynamical response. The PZT patches can be embedded on the composite structures to measure their vibrational response. In this paper, ABAQUS software is used to build the finite element model of the PZT-composite structure. The composite structure is modeled with different boundary conditions. It is observed that the orientation of the fibers as well as the boundary condition directly put their effect on the modal-model of the composite structure and also on the selection of the optimal position of the PZT patches. It is found that the optimal position of the PZT directly depends upon the fiber orientation.

10 November 2022 in Physica Scripta
Verified
Journal Article
Closed access
SRSaurabh Rawat
Saurabh Rawat
RSRahul Samyal
Rahul Samyal
RBRaman Bedi
Raman Bedi
ABAshok Kumar Bagha
Ashok Kumar Bagha
The microwave processing of materials is gaining popularity over the past decade due to its unique heating abilities. The microwave hybrid heating (MHH) technique has effectively processed bulk metallic materials. MHH is assisted by susceptor material which forces metals to absorb microwave radiations. Further, MHH is modified to selective microwave hybrid heating (SMHH) to increase the efficiency of the process. This work examines the performance of Graphite and Charcoal susceptors with a conical vertical cavity for SMHH using FEM simulation. It is observed that the maximum temperature achieved by Graphite was 215 °C at an exposure time of 300 s, whereas, for Charcoal susceptor, it is 655 °C. Further, the effect of different vertical cavity shapes (cylindrical and conical) on the SMHH technique is presented for Charcoal susceptor. For an exposure time of 300 s, the temperature rise in the conical and cylindrical cavity is 655 °C and 319 °C, respectively. From resistive heat flow, time-temperature profile and temperature distribution, it is clear how SMHH is significantly effective for a conical vertical cavity having Charcoal susceptor. In addition, the performance of the conical vertical cavity having Charcoal susceptor was validated through experimental study. The real-time temperature profile was determined through testo 885/testo 890 thermal imaging camera. The observed maximum temperature of the susceptor after heating for 300 s was 639.9 °C.

1 January 2020 in Materials Today: Proceedings
Verified
Journal Article
Closed access
RSRahul Samyal
Rahul Samyal
ABAshok Kumar Bagha
Ashok Kumar Bagha
RBRaman Bedi
Raman Bedi


31 January 2023 in Physica Scripta
Verified
Journal Article
Closed access
RSRahul Samyal
Rahul Samyal
RBRaman Bedi
Raman Bedi
ABAshok Kumar Bagha
Ashok Kumar Bagha
The joint between dissimilar materials is always challenging to develop through traditional techniques due to the different properties of the parent materials. However, a novel non-traditional route of joining similar and dissimilar materials through energy conversion and absorption has been developed called SMHH (selective microwave hybrid heating). It has gained much attention due to its unique heating abilities. In the present work, the lap joint between SS202-SS304 is developed through SMHH placing nickel powder as an interlayer. The lap joint was characterized mechanically through shear tests and microhardness. Since the sheared area of the joint is large, it is challenging to achieve a good joint. Thus, to develop a solid joint, laser surface texturing (LST) was introduced to the joining surfaces, and the joints were characterized. After LST was introduced, a fully diffused joint interlayer region was observed through scanning electron microscopy (SEM). The EDS results confirmed the complete metallurgical bonding occurred by the diffusion of elements across the weld zone. From the XRD spectrum, the formation of intermetallic compounds like FeNi, FeNi3, C3Fe7, and M23C6 were identified at the joint region. The mean microhardness of 355 ± 10 HV was determined at the joint region of lap joints with LST. A lap joint with LST exhibits 217 MPa of shear strength, which is significantly higher than the joints without LST. Fractography of the shear failure specimens pointed out that partial heating of the interlayer caused incomplete bonding of the base metal and interlayer for without LST lap joints. However, mixed mode failure of SS202 near the overlap region of the LST lap joint occurred. It is concluded that the addition of LST on the lap joint has made a colossal impact on enhancing joint strength and intermetallic bonding. In addition, temperature-time profiling was studied to understand the heating mechanism involved in SMHH using thermocouples.

1 January 2019 in Materials Today: Proceedings
Verified
Journal Article
Closed access
RSRahul Samyal
Rahul Samyal
SSSukhjeet Singh
Sukhjeet Singh
ABAshok K. Bagha
Ashok K. Bagha