Lanthanum-doped ordered mesoporous hollow silica spheres were fabricated and utilized as phosphate adsorbents for the first time. Our prepared adsorbents exhibited spherical shapes with macropores in the center and ordered 2D hexagonal mesopores in the shell. By increasing the actual loading of La from 4.19 wt% to 22.44 wt%, the BET surface areas of the adsorbents decreased from 987.48 m2 g−1 to 420.38 m2 g−1, coupled with a decline in average pore diameters and total pore volumes. In the batch adsorption tests, the adsorbents with greater amounts of La loading possessed markedly enhanced adsorption capacities; in contrast, the un-doped pure ordered mesoporous hollow silica particles could hardly adsorb any phosphate in solution. The adsorption isotherms of the La-doped ordered mesoporous hollow silica spheres were represented better by using the Langmuir model than the Freundlich model. The sample with 22.44 wt% La loading exhibited a maximum phosphate capture capacity of 47.89 mg P g−1. In the kinetic study, its phosphate adsorption followed the pseudo-second-order model well. Moreover, a dramatically fast kinetic adsorption was observed in the solution with a low phosphorus concentration of 2 mg P L−1; the adsorption equilibrium was reached in 15 min, with a 99.71% phosphate removal rate. High adsorption capacities were achieved within the pH range 3.0 to 8.0; relatively high selectivity to phosphate was observed in the presence of coexisting anions.
1 October 2018 in Journal of Environmental Management
Forward osmosis (FO) membrane technology has attracted rapidly growing research interest because it shows great potential in reducing energy consumption and costs in water desalination and treatment. The lack of a suitable draw agent has been identified as a challenging problem in the commercial implementation of FO technology. Recent years have seen significant advances in the development of smart draw agents with responsive properties, from which water can be recovered under different stimuli. This review highlights the properties and performance of some interesting smart draw agents reported recently, including functionalized magnetic nanoparticles, thermo-responsive polyelectrolytes, and stimuli-responsive polymer hydrogels.
LaFeO3 (LFO)-doped mesoporous silica (HPS) (HPS-xLFO with theoretical LFO/silica molar ratio x = 0.075, 0.15, 0.3) was successfully prepared via impregnation of metal ions into the porous silica HPS-0LFO support and subsequent calcination. The characterization studies suggest that increasing the doping of LFO, which exhibited a particle size of ∼10–15 nm, in the silica support led to a reduction in surface area and bandgap of the resulting catalyst. The use of HPS-0.15LFO yielded a superior removal rate (98.9%) of Rhodamine B (RhB), thanks to the effective dark adsorption and visible light-induced photo-Fenton degradation, both of which were greater than those of pure LFO crystals. This enhancement could be explained by the unique properties of the mesoporous silica support. In particular, the wide-opening mesopores created a large surface area to dope LFO as active sites and minimize diffusion of RhB into pores during the photo-Fenton reaction. The photo-Fenton catalytic degradation of RhB could reach 98.6% within 90 min exposure to visible light irradiation under optimized conditions: RhB concentration = 10 mg L−1, catalyst dosage = 1 g L−1, pH = 6 and H2O2 = 15 mM. Moreover, the recycle and reuse test proved the good stability and repetitive use of HPS-0.15LFO for high performance RhB removal.
1 March 2019 in Journal of Environmental Management