Biodegradable packaging offers an affordable and sustainable solution to global pollution, particularly in developing countries with limited recycling infrastructure. Starch is well suited to develop biodegradable packages for foods due to its wide availability and simple, low-tech production process. Although the development of starch-based packaging is well documented, most studies focus on the laboratory stages of formulation and plasticization, leaving gaps in understanding key phases such as raw material conditioning, industrial-scale molding, post-production processes, and storage. This work evaluates the value chain of starch-based packaging in developing countries. It addresses the challenges, equipment, and process conditions at each stage, highlighting the critical role of moisture resistance in the final product’s functionality. A particular focus is placed on replacing single-use plastic packaging, which dominates food industries in regions with agricultural economies and rich biodiversity. A comprehensive analysis of starch-based packaging production, with a detailed understanding of each stage and the overall process, should contribute to the development of more sustainable and scalable solutions, particularly for the replacement of single-use packages, helping to protect vulnerable biodiverse regions from the growing impact of plastic waste.
Thermoplastic starch (TPS) can be a sustainable alternative to petrochemical plastics for flexible packaging, especially in rainforests and tropical regions where native starch sources such as cassava are abundant. However, one problem preventing TPS packaging from widespread use is its susceptibility to moisture. This study evaluated TPS formulations based on Amazonian cassava starch reinforced with plantain leaf fibers, beeswax, and low-density polyethylene (LDPE) particles. The plastic compounds were extruded to obtain pellets and then films at 120–130 °C. The resulting films were then cut and heat-sealed to obtain flexible packaging. Different properties of the TPS packages were evaluated, such as mechanical strength, water vapor transmission (WVTR), color, infrared spectrum (FT-IR), and moisture adsorption. The results showed that the formulation with beeswax (2% w/w), plantain leaves powder (1% w/w), and LDPE powder (2% w/w) had a higher tensile strength (5.99 MPa) and moisture barrier (WVTR = 366.6 g m−2 d−1) compared to the control formulation only with plasticizers (glycerol and water) but without reinforcements (0.48 MPa and 1486.6 g m−2 d−1, respectively). Films with only beeswax (4% w/w) and plantain leaves powder (2.5% w/w) had tensile strength = 5.53 MPa and WVTR = 716.8 g m−2 d−1, with higher moisture adsorption compared to the samples with LDPE. In both cases, homogeneous and heat-sealable bags were obtained. The reinforced TPS films can be used to reduce the environmental impact generated by single-use packaging applications such as food commercialization.
C footprint is a feature used to search the integral life cycle of a product to predict its environmental impact. The packaging industry is changing rapidly to the production of biodegradable products to mitigate the negative environmental consequences of the use of single-use packages. It is thought that biodegradable packages should be more sustainable than traditional plastics due to the sources of the raw materials used to produce them, but this is not always true and depends on the issues considered, the methodology, and the scale analyzed. Limited research includes case studies from developing countries where waste management is less efficient and where the environmental impacts of single-use packaging can be more significant. This paper evaluates the C footprint of bags and dishes made from traditional or local biodegradable sources in an Amazonian settlement of Colombia, such as thermoplastic cassava starch and powdered plantain leaves, to evaluate the impact of locally made biodegradable packaging vs. imported petrochemical ones. Results show that using local raw materials and in situ production reduces the C footprint of biodegradable packages, considering that the energy source for production and transport are important contributors to the C footprint beyond the raw materials used, with ratios that can be between 0.1 and 7 times more kg CO2 eq generated per functional unit.
Currently, the packaging sector must continue developing more sustainable systems to reduce the high quantities of single-use plastic waste generated. This study evaluated the production and characterization of bio-based composite trays with antimicrobial activity. Different formulations of polybutylene adipate co-terephthalate (PBAT) and polylactic acid (PLA) with polyethylene glycol (PEG) as plasticizer and citric acid as a compatibilizer/crosslinker were evaluated, in addition to the inclusion of plantain microfibers (PFs), TiO2, and menthol as reinforcing and antimicrobial agents, respectively. The mixtures were subjected to pellet extrusion (165/175/185/190 °C and 60 rpm) and then to flat sheet extrusion (at 185/190/195/205 °C and 60 rpm), besides calendering (at 3.5–6.0 rpm). A single-screw extruder was used in both cases. The obtained sheets (0.317 ± 0.040 mm thick and 17 cm wide) were molded into 12.5 × 11.0 × 3.5 cm trays in a thermoforming machine (at 325 °C and vacuum pressure). For the resulting composite sheets and trays, measurements of mechanical strength, moisture absorption, barrier (WVTR), transmittance, and color were performed. FT-IR, DSC, TGA, SEM, and in vitro antimicrobial tests were also conducted. Based on these tests, an initial formulation with an 85/15 (w/w) PLA/PBAT ratio was defined, which was then reinforced with 3% (w/w) PF. Furthermore, the inclusion of 5% (w/w) menthol in the composite led to fungistatic activity against Botrytis cinerea, also resulting in homogeneous sheets (tensile strength 24.137 ± 1.439 MPa) and trays (compressive strength 0.113 ± 0.010 MPa). These findings can be applied to the packaging and preservation of perishable produce.
Thermoplastic starch (TPS) can be a sustainable alternative to petrochemical plastics for flexible packaging, especially in rainforests and tropical regions where native starch sources such as cassava are abundant. However, one problem preventing TPS packaging from widespread use is its susceptibility to moisture. This study evaluated TPS formulations based on Amazonian cassava starch reinforced with plantain leaf fibers, beeswax, and low-density polyethylene (LDPE) particles. The plastic compounds were extruded to obtain pellets and then films at 120-130 °C. The resulting films were then cut and heat-sealed to obtain flexible packaging. Different properties of the TPS packages were evaluated, such as mechanical strength, water vapor transmission (WVTR), color, infrared spectrum (FT-IR), and moisture adsorption. The results showed that the formulation with beeswax (2 % w/w), plantain leaves powder (1 % w/w), and LDPE powder (2 % w/w) had a higher tensile strength (5.99 MPa) and moisture barrier (WVTR = 366.6 g m-2 d-1) compared to the control formulation only with plasticizers (glycerol and water) but without reinforcements (0.48 MPa and 1486.6 g m-2 d-1, respectively). Films with only beeswax (4 % w/w) and plantain leaves powder (2.5 % w/w) had tensile strength = 5.53 MPa and WVTR = 716.8 g m-2 d-1, with higher moisture adsorption compared to the samples with LDPE. In both cases, homogeneous and heat-sealable bags were obtained. The reinforced TPS films can be used to reduce the environmental impact generated by single-use packaging applications such as food commercialization.