Vehicular time headway is of fundamental importance in traffic engineering. For any traffic simulation to effectively address traffic problems, accurate vehicle generation is essential. Previous researches on this subject have focused solely on the stochastic modeling of uninterrupted facilities. Yet little research has been conducted on interrupted facilities such as suburban arterials. This paper proposes theoretical headway models for a suburban arterial. Using a traffic detector based on laser sensors, a large amount of accurate headway data were obtained in Korea. To analyze the data according to different states of traffic flow, the headways were categorized into five flow groups. Subsequent runs tests for each headway group rejected the randomness assumption for the lowest flow (5–9 veh/min). Therefore, theoretical modeling was performed only for the four remaining flows (10–14, 15–19, 20–24, and 25–29 veh/min). The Johnson SB model achieved the best fit for a flow of 10–14 veh/min, whereas the Johnson SU model provided the best fits for the three other flows. The Log-Logistic and Log-normal models were also accepted for high flows. In addition to analyses on statistics of the collected headway, the characteristics of the fitted model revealed that the headway has somewhat different features, compared to those of uninterrupted facilities. This paper provides a better understanding of headway for interrupted facilities and constitutes a starting point for developing a descriptively accurate simulation model for signalized arterials.
1 August 2016 in IET Intelligent Transport Systems
With increasing market penetration, dedicated short‐range communications (DSRC) probes are attracting more interest in the advanced traveller information system as a way to efficiently alleviate traffic congestion. Generally, DSRC probes, thanks to their ability to directly collect point‐to‐point travel time, are considered to be superior to conventional point detectors. However, outlying observations are inevitable in DSRC probe data, and can erroneously indicate abnormally long travel times. In this study, a practical algorithm to filter out outliers in DSRC probe data is proposed. The suggested algorithm is divided into two parts. In the case of small sample, it uses a previous interval value to determine a valid range for current interval values; otherwise, it uses a modified median filter that uses the median and absolute deviation of current interval observations to determine the valid range. The algorithm has been thoroughly verified using various types of DSRC probe data in interrupted and uninterrupted rural highways near Seoul, Korea. Consequently, it was proven to be sufficient to overcome the deficiencies of the previous techniques.
17 December 2024 in Transportation Research Interdisciplinary Perspectives
Background: Faced with the high rate of traffic accidents under slippery road conditions, agencies attempt to quickly identify slippery spots on the road and drivers want to receive information on the impending dangerous slippery spot, also known as “black ice.” Methods: In this study, wheel slip, defined as the difference between both speeds of vehicular transition and wheel rotation, was used to detect road slipperiness. Three types of experiment cars were repeatedly driven on snowy and dry surfaces to obtain wheel slip data. Three approaches, including regression analysis, support vector machine (SVM), and deep learning, were explored to categorize into two states-slippery or non-slippery. Results: Results indicated that a deep learning model resulted in the best performance with accuracy of 0.972, only where sufficient data were obtained. SVM models universally showed good performance, with average accuracy of 0.965, regardless of sample size. Conclusion: The proposed models can be applied to any connected devices including digital tachographs and on-board units for cooperative ITS projects that gather wheel and transition speeds of a moving vehicle to enhance road safety in winter season though collecting followed by providing dangerous slippery spots on the road.
15 November 2024 in The Open Transportation Journal
Background: Travel time prediction is fundamentally important in advanced traveler information systems. Particularly, in the Dedicated Short-Range Communications (DSRC) traffic information system targeted by this study, travel times are obtained after vehicles terminate trips on the route, indicating that a time-lag phenomenon is inevitable. Therefore, travel time prediction is even more emphasized in DSRC systems. With advances in artificial intelligence technologies, many new machine learning algorithms have recently been introduced. Methods: In this study, three machine learning algorithms—k-Nearest Neighbor (k-NN), Long Short-Term Memory (LSTM), and Transformer—were applied to predict travel times collected on a DSRC-equipped national highway. Travel time outliers caused by entry and exit maneuvers at intersections were filtered using a robust outlier treatment algorithm. Results: From applying the prediction algorithms, errors of 12.4%, 11.7%, and 10.3% were revealed for k-NN, LSTM, and Transformer, respectively. To identify the statistical significance of the differences in prediction performance, paired t-tests were performed. Consequently, all the differences between the algorithms were proven to be statistically significant. The differences in performance were found to be generally more significant under congested conditions compared to uncongested conditions. Conclusion: The enhanced reliability of real-time travel time information can increase the effectiveness of DSRC traffic information systems by encouraging drivers to divert from congested routes or adjust their trip schedules to less congested periods.
Traffic signal control (TSC) is a part of intelligent transportation systems to reduce traffic congestion and emissions. Recently, dynamic traffic signal control systems using artificial intelligence and reinforcement learning have been studied to achieve these goals. Although verification of TSC algorithms is ideally performed in a real environment, traffic simulation tools are widely used due to safety issues. However, existing simulation tools have limitations in real-time result analysis, making it difficult to analyze the strengths and weaknesses of each algorithm according to each traffic situation. In this paper, we propose RTASS, a real-time analysis simulation system for TSC algorithms that enables real-time comparison and result analysis, to improve the problems of such a simulation environments. To validate RTASS, we experiment using actual intersection data. As a result of comparing the traffic volume of the actual intersection data and the simulation, we confirmed that the error rate was maintained within 2% on average. In addition, we evaluate the performance of each TSC algorithm using RTASS and verify the results by comparing two existing methods and two proposed TSC methods. We confirmed that real-time comparison of traffic analysis and algorithms is possible using the proposed simulation system.