Byung-il Kwon

Prof. Byung-il Kwon

Department of Electronic Engineering, Hanyang University (ERICA), Ansan, Gyeonggi, Republic of Korea

Research Focus & Metrics

Academic Career Length

32Years (1995-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
WZWenliang Zhao
Wenliang Zhao
FXFuzhen Xing
Fuzhen Xing
XWXiuhe Wang
Xiuhe Wang
TLThomas A. Lipo
Thomas A. Lipo
BKByung-il Kwon
Byung-il Kwon
This paper presents the design and analysis of a novel permanent-magnet (PM)-assisted synchronous reluctance machine (PMA-SynRM) with axially integrated magnets for improving machine performance by using a finite-element method (FEM). The proposed PMA-SynRM features a simple structure with high performance by incorporating the advantages of a SynRM and a surface-mounted PM machine (SPMM). In particular, the rotor parts of the SynRM and SPMM are assembled to make the “q-axis” located 45° (elec.) from the d-axis. Thus, the magnetic torque and reluctance torque of the proposed PMA-SynRM reach the maximum values at the same current phase angle, for efficient production of the total torque. To highlight the advantages of the proposed PMA-SynRM, a conventional PMA-SynRM is adopted for comparison under the same operating conditions. The FEM analysis results finally demonstrate that the proposed PMA-SynRM has a higher total torque and power factor, as well as greatly reduced torque ripple, when compared to the conventional PMA-SynRM with the same magnet amounts. In addition, the Mises stress analysis indicates that the configuration of the proposed PMA-SynRM exhibits the advantage of avoiding stress deterioration in the rotor ribs.

5 February 2019 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
MAMohammad Ayub
Mohammad Ayub
AHAsif Hussain
Asif Hussain
Ghulam Jawad SirewalGhulam Jawad Sirewal
Ghulam Jawad Sirewal
BKByung-il Kwon
Byung-il Kwon

1 March 2017 in IET Electric Power Applications
Verified
Journal Article
Open access
PDF file
HKHong‐Seok Kim
Hong‐Seok Kim
BKByung-il Kwon
Byung-il Kwon
An optimal design for the interior permanent magnet (IPM) motor is proposed to reduce vibration and increase average torque, based on simultaneous consideration of the rotor d‐ axis notch shape, the stator chamfer angle, and the magnetisation direction. The notch shape of the rotor and the chamfer of the stator tooth shape were first reviewed in order to reduce the vibration of the IPM motor; however, the optimal shapes for reduced vibration also reduced the average torque. Then, a design optimisation for average torque improvement was performed considering the magnetisation direction and the vibration reduction based on the modelled stator and rotor shapes. Finally, the validity and superiority of the optimised design were confirmed by manufacturing and testing a prototype motor.

22 January 2019 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
MAMohammad Ayub
Mohammad Ayub
Ghulam Jawad SirewalGhulam Jawad Sirewal
Ghulam Jawad Sirewal
BKByung-il Kwon
Byung-il Kwon
In this paper, a new consequent-pole hybrid excitation brushless wound field synchronous machine (CpHE-BL-WFSM) with fractional-slot concentrated winding is proposed. The proposed machine inherits the features of a brushless excited topology in which a rotor field is excited through an additional sub-harmonic magnetomotive force generated by the stator winding arrangement. In conventional BL-WFSMs, the zero starting torque and relatively low efficiency compared to that of permanent magnet synchronous machines (PMSMs) makes it difficult to replace expensive PMSMs in low- and medium-power applications. The advantages of the proposed machine are improved efficiency, improved starting torque, and high electromagnetic torque as compared to conventional brushless machines. A 2-D finite-element analysis is conducted to compare the proposed machine with the conventional BL-WFSM topologies. The results reveal that the proposed machine topology exhibits greater efficiency, improved starting torque, high average torque, and improved torque density.

10 November 2017 in Electrical Engineering
Verified
Journal Article
Closed access
PDF file
AHAsif Hussain
Asif Hussain
BKByung-il Kwon
Byung-il Kwon

6 July 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
NBNoman Baloch
Noman Baloch
BKByung-il Kwon
Byung-il Kwon
Yuting GaoYuting Gao
Yuting Gao
This paper proposes a dual-stator consequent-pole permanent magnet vernier machine comprised of two stators and a sandwiched rotor. The proposed topology has high torque density owing to its special working principle and low cost due to the consequent-pole structure. To verify the superiority of the proposed machine, it is compared with an existing dual-stator vernier machine in terms of important electromagnetic characteristics. The finite-element analysis comparison of the two machines shows that the proposed machine achieves a higher average torque and a higher torque-per-magnet volume in comparison with the existing machine. Moreover, the proposed machine uses less magnet volume; therefore, the cost of the machine is significantly reduced. Furthermore, the proposed machine is more efficient compared with the existing machine.