Noman Baloch

Noman Baloch

Auto-generated profile, based on publicly available information

Noman Baloch

Department of Electronic Systems Engineering, Hanyang University, Ansan, South Korea

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2018 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
NBNoman Baloch
Noman Baloch
BKByung-il Kwon
Byung-il Kwon
Yuting GaoYuting Gao
Yuting Gao
This paper proposes a dual-stator consequent-pole permanent magnet vernier machine comprised of two stators and a sandwiched rotor. The proposed topology has high torque density owing to its special working principle and low cost due to the consequent-pole structure. To verify the superiority of the proposed machine, it is compared with an existing dual-stator vernier machine in terms of important electromagnetic characteristics. The finite-element analysis comparison of the two machines shows that the proposed machine achieves a higher average torque and a higher torque-per-magnet volume in comparison with the existing machine. Moreover, the proposed machine uses less magnet volume; therefore, the cost of the machine is significantly reduced. Furthermore, the proposed machine is more efficient compared with the existing machine.

3 May 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
NBNoman Baloch
Noman Baloch
SKSalman Khaliq
Salman Khaliq
BKByung-il Kwon
Byung-il Kwon
In this paper, a high-temperature superconductor dual-stator spoke-type linear vernier machine (HTS-DSSLVM) is proposed for wave energy extraction, which offers high-thrust force density and better power factor due to leakage flux reduction. HTS bulks are introduced in between the split flux modulation teeth to shield the leakage flux and hence improve the force density and power factor. The electromagnetic characteristics of the machine are comprehensively investigated and compared with that of a recently presented dual-stator spoke-type linear vernier machine (DSSLVM). The results show that the proposed machine yields higher thrust force and better power factor than the DSSLVM due to reduced leakage flux in the proposed machine.

29 May 2017 in IEEE Transactions on Magnetics
Verified
Journal Article
Closed access
NBNoman Baloch
Noman Baloch
SKSalman Khaliq
Salman Khaliq
BKByung-il Kwon
Byung-il Kwon
In this paper, a high force density, high-temperature superconductor dual-stator tubular Vernier machine (HTS-DSTVM) has been proposed for wave energy extraction. The machine adopts dual-stator configuration with spoke-type permanent magnets on the translator. The inner stator does not have any winding, and HTS bulks are placed between the adjacent flux modulation teeth of the inner stator to decrease the leakage flux and improve the force density. The HTS bulks effectively shield the leakage flux of the proposed HTS-DSTVM to improve the force density and power factor. 2-D finite-element method results validate that the proposed HTS-DSTVM yields a higher thrust force density per magnet volume and higher power factor compared with the recently presented flat dual-stator spoke-type linear Vernier machine due to the leakage flux shielding effect of HTS bulks.

12 May 2020 in IEEE Access
Verified
Journal Article
Open access
NBNoman Baloch
Noman Baloch
SAShahid Atiq
Shahid Atiq
BKByung-Il Kwon
Byung-Il Kwon
This paper proposes a wound field pole changing vernier machine with fractional slot concentrated winding for electric vehicles application. The main aim of the paper is to utilize the advantages of a vernier machine and a wound field synchronous machine in a single topology using a fractional slot concentrated armature winding. The proposed machine operates in a vernier mode at low speeds and a wound-field synchronous mode at high speeds to utilize the merits of both a vernier machine and a wound-field synchronous machine. The topology, operating principle and pole-changing method of the proposed machine are explained initially. Then, finite element analysis (FEA) is utilized to study the electromagnetic characteristics such as back EMF, torque, wide speed range operation and efficiency of the proposed topology in two modes. Further, a prototype of the machine is manufactured and the FEA results are validated through experiments. The FEA and experiment results show that the proposed machine is a promising candidate for electric vehicles application.

2 July 2019 in IEEE Access
Verified
Journal Article
Open access
NBNoman Baloch
Noman Baloch
JKJung-Woo Kwon
Jung-Woo Kwon
MAMohammad Ayub
Mohammad Ayub
BKByung-il Kwon
Byung-il Kwon
This paper proposes a low-cost dual mechanical port dual excitation machine for washing machine application. The proposed machine artfully integrates two machines (vernier and permanent magnet synchronous machine) into one. An outer vernier rotor is used for low-speed washing operations and an inner PMSM rotor is used for high-speed drying operations of a washing machine. The proposed machine is compared with a recently presented machine for the same application to verify its merit of cost-effectiveness. A comparison drawn using the finite-element method shows that the cost of the permanent magnets is low in proposed topology owing to the usage of ferrite magnets. Also, the power factor of the proposed machine is high during drying operation compared with the existing machine, hence, a lower-rating inverter is required to drive the machine, which further reduces the overall cost. In addition, the proposed machine provides similar efficiencies as the existing machine for both washing and drying operations.

1 July 2020 in IEEE Access
Verified
Journal Article
Open access
JKJung-Woo Kwon
Jung-Woo Kwon
NBNoman Baloch
Noman Baloch
BKByung-il Kwon
Byung-il Kwon
A high gear ratio flux switching permanent magnet machine (HFSPM) was proposed to improve the torque performance in flux switching permanent magnet machine (FSPM). Conventional FSPMs address flux bypass issue when designed with a high gear ratio. The HFSPM adopts a dual rotor structure to overcome this flux bypass issue. First, the cause and effect of flux bypass issue was discussed using a magnetic equivalent circuit (MEC). Further, the process of overcoming the flux bypass issue using dual rotor structure was discussed. An alternative HFSPM, consequent pole HFSPM (CP-HFSPM), was proposed to enhance torque performance. The CP-HFSPM was optimized for high torque performance and proper power factor.