Sea surface temperature (SST) products that can resolve fine scale features, such as sub-mesoscale eddies, ocean fronts and coastal upwelling, are increasingly in demand. In response to user requirements for gap-free, highest spatial resolution, best quality and highest accuracy SST data, the Australian Bureau of Meteorology (BoM) produces operational, real-time Multi-sensor SST level 3 products by compositing SST from Advanced Very-High-Resolution Radiometer (AVHRR) sensors on Meteorological Operational satellite (MetOp)-B and National Oceanic and Atmospheric Administration (NOAA) 18, along with SST from Visible Infrared Imaging Radiometer Suite (VIIRS) sensors on the Suomi National Polar-orbiting Partnership (Suomi NPP) and NOAA 20 polar-orbiting satellites for the Australian Integrated Marine Observing System (IMOS) project. Here we discuss our method to combine data from different sensors and present validation of the satellite-derived SST against in situ SST data. The Multi-sensor Level 3 Super Collated (L3S) SSTs exhibit significantly greater spatial coverage and improved accuracy compared with the pre-existing IMOS AVHRR-only L3S SSTs. When compared to the Geo Polar Blended level 4 analysis SST data over the Great Barrier Reef, Multi-sensor L3S SST differs by less than 1 ${}^{°}$C while exhibiting a wider range of SSTs over the region. It shows more variability and restores small-scale features better than the Geo Polar Blended level 4 analysis SST data. The operational Multi-sensor L3S SST products are used as input for applications such as IMOS OceanCurrent and the BoM ReefTemp Next-Generation Coral Bleaching Nowcasting service and provide useful insight into the study of marine heatwaves and ocean upwelling in near-coastal regions.

This study has evaluated five years (2016–2020) of Himawari-8 (H8) Sea Surface Temperature (SST) Level 2 Pre-processed (L2P) data produced by the Australian Bureau of Meteorology (Bureau) against shipborne radiometer SST measurements obtained from the Infrared SST Autonomous Radiometer (ISAR) onboard research vessel RV Investigator. Before being used, all data sets employed in this study have gone through careful quality control, and only the most trustworthy measurements are retained. With a large matchup database (31,871 collocations in total, including 16,418 during daytime and 15,453 during night-time), it is found that the Bureau H8 SST product is of good quality, with a mean bias ± standard deviation (SD) of −0.12 °C ± 0.47 °C for the daytime and −0.04 °C ± 0.37 °C for the night-time. The performance of the H8 data under different environmental conditions, determined by the observations obtained concurrently from RV Investigator, is examined. Daytime and night-time satellite data behave slightly differently. During the daytime, a cold bias can be seen under almost all environmental conditions, including for most values of wind speed, SST, and relative humidity. On the other hand, the performance of the night-time H8 SST product is consistently more stable under most meteorological conditions with the mean bias usually close to zero.

As a contribution to the Integrated Marine Observing System (IMOS), the Bureau of Meteorology introduces new reprocessed Himawari-8 satellite-derived Sea Surface Temperature (SST) products. The Radiative Transfer Model and a Bayesian cloud clearing method is used to retrieve SSTs every 10 min from the geostationary satellite Himawari-8. An empirical Sensor Specific Error Statistics (SSES) model, introduced herein, is applied to calculate bias and standard deviation for the retrieved SSTs. The SST retrieval and compositing method, along with validation results, are discussed. The monthly statistics for comparisons of Himawari-8 Level 2 Product (L2P) skin SST against in situ SST quality monitoring (iQuam) in situ SST datasets, adjusted for thermal stratification, showed a mean bias of −0.2/−0.1 K and a standard deviation of 0.4–0.7 K for daytime/night-time after bias correction, where satellite zenith angles were less than 60° and the quality level was greater than 2. For ease of use, these native resolution SST data have been composited using a method introduced herein that retains retrieved measurements, to hourly, 4-hourly and daily SST products, and projected onto the rectangular IMOS 0.02 degree grid. On average, 4-hourly products cover ≈$10\%$ more of the IMOS domain, while one-night composites cover ≈$25\%$ more of the IMOS domain than a typical 1 h composite. All available Himawari-8 data have been reprocessed for the September 2015–December 2022 period. The 10 min temporal resolution of the newly developed Himawari-8 SST data enables a daily composite with enhanced spatial coverage, effectively filling in SST gaps caused by transient clouds occlusion. Anticipated benefits of the new Himawari-8 products include enhanced data quality for applications like IMOS OceanCurrent and investigations into marine thermal stress, marine heatwaves, and ocean upwelling in near-coastal regions.