Oxidized MC carbides which act as main crack initiation sites in a polycrystalline superalloy under thermal-mechanical fatigue (TMF) conditions at 850 °C were studied. Microstructural observations in the TMF tested specimens were compared to findings from bulk samples exposed isothermally in air at 850 °C for 30 hours in the absence of any external applied load. Carbides were found to oxidize rapidly after exposure at 850 °C for 30 hours resulting in surface eruptions corresponding to oxidation products, from where micro-cracks initiated. Plastic deformation due to volume expansion of the often porous oxidized carbides led to high dislocation densities in the adjacent matrix as revealed by controlled electron channeling contrast imaging. The high dislocation density facilitated the dissolution kinetics of γ′ precipitates by segregation and diffusion of chromium and cobalt along the dislocations via pipe diffusion, resulting in the formation of soft recrystallized grains. Atom probe tomography revealed substantial compositional differences between the recrystallized grains and the adjacent undeformed γ matrix. Similar observations were made for the TMF tested alloy. Our observations provide new insights into the true detrimental role of oxidized MC carbides on the crack initiation performance of polycrystalline superalloys under TMF.
Since Ni-based single-crystal superalloys are anisotropic materials, their behavior in different crystal orientations is of great interest. In this study, the yielding behavior in both tension and compression for , and oriented materials at 500 °C has been investigated. The direction showed a serrated yielding behavior, a great tension/compression asymmetry in yield strength and visible deformation bands. However, the and directions showed a more homogeneous yielding, less tension/compression asymmetry in yield strength and no deformation bands. Microstructure investigations showed that the serrated yielding behavior of the direction can be attributed to the appearance of dynamic strain aging (DSA) and that only one slip system is active in this direction during plastic deformation.