The force modulation of robotic manipulators has been extensively studied for several decades. However, it is not yet commonly used in safety-critical applications due to a lack of accurate interaction contact modeling and weak performance guarantees—a large proportion of them concerning the modulation of interaction forces. This study presents a high-level framework for simultaneous trajectory optimization and force control of the interaction between a manipulator and soft environments, which is prone to external disturbances. Sliding friction and normal contact force are taken into account. The dynamics of the soft contact model and the manipulator are simultaneously incorporated in a trajectory optimizer to generate desired motion and force profiles. A constrained optimization framework based on the alternative direction method of multipliers has been employed to efficiently generate real-time optimal control inputs and high-dimensional state trajectories in a model-predictive control fashion. The experimental validation of the model performance is conducted on a soft substrate with known material properties using a Cartesian space force control mode. Results show a comparison of ground truth and real-time model-based contact force and motion tracking for multiple Cartesian motions in the valid range of the friction model. It is shown that a contact-model-based motion planner can compensate for frictional forces and motion disturbances and improve the overall motion and force tracking accuracy. The proposed high-level planner has the potential to facilitate the automation of medical tasks involving the manipulation of compliant, delicate, and deformable tissues.
Earthworms (Lumbricus terrestris) are characterized by soft, highly flexible and extensible bodies, and are capable of locomoting in most terrestrial environments. Previous studies of earthworm movement focused on the use of retrograde peristaltic gaits in which controlled contraction of longitudinal and circular muscles results in waves of shortening/thickening and thinning/lengthening of the hydrostatic skeleton. These waves can propel the animal across ground as well as into soil. However, worms benefit from axial body bends during locomotion. Such lateral bending and buckling dynamics can aid locomotor function via hooking/anchoring (to provide propulsion), modify travel orientation (to avoid obstacles and generate turns) and even generate snake-like undulatory locomotion in environments where peristaltic locomotion results in poor performance. To the best of our knowledge, lateral bending and buckling of an earthworm’s body has not yet been systematically investigated. In this study, we observed that within confined environments, worms use lateral bending and buckling to anchor their body to the walls of their burrows and tip (anterior end) bending to search the environment. This locomotion strategy improved the performance of our soft-bodied robophysical model of the earthworm both in a confined (in an acrylic tube) and above-ground heterogeneous environment (rigid pegs), where present peristaltic robots are relatively limited in terradynamic capabilities. In summary, lateral bending and buckling facilitates the mobility of earthworm locomotion in diverse terrain and can play an important role in the creation of low cost soft robotic devices capable of traversing a variety of environments.
This study presents the design of a pneumatic artificial muscle with integrated soft optical sensing for estimation of muscle contraction length and contraction force. Each optical sensor uses an light emitting diode (LED)-photodiode pair to measure the light reflected by a silicone diaphragm embedded in the muscle. One diaphragm is designed to respond primarily to changes in muscle pressure, whereas the other is designed to respond to changes in muscle length. Muscle sensors were calibrated by measuring muscle contraction force versus length for a range of fixed muscle pressures and then mapping optical sensor data to the corresponding length and force data. To evaluate sensorized muscle performance in a robotic system, two antagonistic muscle pairs were used to actuate a planar two-degree-of-freedom arm. In various static and dynamic tests, arm positions and forces were estimated from optical sensor measurements. Optical sensor estimates of static and dynamic end-effector position estimation yielded average errors of 1.3 and 1.1 cm, respectively. Optical sensor estimates of static and dynamic end-effector force yielded average total force errors of 0.16 and 0.12 N for maximum end-effector forces of 2.0 and 2.4 N, respectively.
Underactuated compliant robotic hands exploit passive mechanics and joint coupling to reduce the number of actuators required to achieve grasp robustness in unstructured environments. Reduced actuation requirements generally serve to decrease design cost and improve grasp planning efficiency, but overzealous simplification of an actuation topology, coupled with insufficient tuning of mechanical compliance and hand kinematics, can adversely affect grasp quality and adaptability. This paper presents a computational framework for reducing the mechanical complexity of robotic hand actuation topologies without significantly decreasing grasp robustness. Open-source grasp planning software and well-established grasp quality metrics are used to simulate a fully-actuated, 24 DOF anthropomorphic robotic hand grasping a set of daily living objects. DOFs are systematically demoted or removed from the hand actuation topology according to their contribution to grasp quality. The resulting actuation topology contained 22% fewer DOFs, 51% less aggregate joint motion, and required 82% less grasp planning time than the fully-actuated design, but decreased average grasp quality by only 11%.
Earthworms ( Lumbricus terrestris ) are characterized by soft, highly flexible and extensible bodies, and are capable of locomoting in most terrestrial environments. Previous studies of earthworm movement have focused on the use of retrograde peristaltic gaits in which controlled contraction of longitudinal and circular muscles results in waves of shortening/thickening and thinning/lengthening of the hydrostatic skeleton. These waves can propel the animal across ground as well as into soil. However, worms can also benefit from axial body bends during locomotion. Such lateral undulation dynamics can aid locomotor function via hooking/anchoring (to provide propulsion), modify travel orientation (to avoid obstacles and generate turns) and even generate snake-like undulatory locomotion in environments where peristaltic locomotion results in poor performance. To the best of our knowledge, the important aspects of locomotion associated with the lateral undulation of an earthworm body are yet to be systematically investigated. In this study, we observed that within confined environments, the worm uses lateral undulation to anchor its body to the walls of their burrows and tip (nose) bending to search the environment. This relatively simple locomotion strategy drastically improved the performance of our soft bodied robophysical model of the earthworm both in a confined (in an acrylic tube) and above-ground heterogeneous environment (rigid pegs), where the peristaltic gait often fails. In summary, lateral undulation facilitates the mobility of earthworm locomotion in diverse environments and can play an important role in the creation of low cost soft robotic devices capable of traversing a variety of environments.