Over the past few decades, a high number of pharmaceuticals have been detected in surface, ground and drinking waters. This contamination comes from domestic sewage, livestock, hospitals and chemical-pharmaceutical industries. Typical examples of these pollutants are the fluoroquinolones - powerful antibiotics used in human and veterinary medicine. The presence of fluoroquinolones in the environment can pose a serious threat to the ecosystem and to human health due to their high consumption globally: in 1998, around 120 tons were produced. Even at low environmental concentrations, antibiotics stimulate bacterial resistance. The consequences of the presence of fluoroquinolones in the environment are not fully understood, but are known to be toxic to plants and aquatic organisms. Approximately 85% of the fluoroquinolones present in influents can be removed by conventional wastewater treatment plants, but the removed fraction is frequently accumulated in the sludge, which is sometimes used as fertilizer, representing an additional input route into the environment. The removal of fluoroquinolones by biological treatment is ineffective, and it is believed that only advanced oxidation technologies are able to destroy these emerging pollutants.

The frequent occurrence of pharmaceuticals in the aquatic environment requires an assessment of their environmental impact and their negative effects in humans. Among the drugs with high harmful potential to the environment are the antibiotics that reach the environment not only, as may be expected, through the effluents from chemical and pharmaceutical industries, but mainly through the sewage and livestock; because around 25 to 75% of the ingested drugs are excreted in unchanged form after the passage through the Gastro-Intestinal Tract. Tetracycline has high world consumption, representing a human consumption of about 23 kg/day in Brazil in 2007. At the moment, researches are being made to develop new tetracycline that incorporate heavy metals (Hg, Cd, Re, Pt, Pd) to their structures in order to increase their bactericidal effect. The conventional wastewater treatment plants are not able to degrade complex organic molecules to reduce their toxicity and improve their biodegradability. For this reason new technologies, i.e., the advanced oxidation processes, are being developed to handle this demand. The objectives of this study are to review the literature on the processes of obtaining tetracycline, presenting its waste treatment methods and evaluation of their environmental impact.

Doxycycline is a broad‐spectrum tetracycline occurring in domestic, industrial, and rural effluents, whose main drawback is the increasing emergence of resistant bacteria. This antibiotic could be degraded by the so‐called Fenton process, consisting in the oxidation of organic pollutants by oxygen peroxide (H ₂ O ₂ ) in the presence of Fe ²⁺ . Experiments were performed according to an experimental Rotational Central Composite Design to investigate the influence of temperature (0–40.0°C), H ₂ O ₂ concentration (100–900 mg/L), and Fe ²⁺ concentration (5–120 mg/L) on residual doxycycline and total organic carbon concentrations. Whereas the final residual doxycycline concentration ranged from 0 to 55.8 mg/L, the oxidation process proved unable to reduce the total organic carbon by more than 30%. The best operating conditions were concentrations of H ₂ O ₂ and Fe ²⁺ of 611 and 25 mg/L, respectively, and temperature of 35.0°C, but the analysis of variance revealed that only the first variable exerted a statistically significant effect on the residual doxycycline concentration. These results suggest possible application of this process in the treatment of doxycycline‐containing effluents and may be used as starting basis to treat tetracycline‐contaminated effluents.