Additive manufacturing (AM) leverages emerging technologies and well-adopted processes to produce near-net-shape products. The advancement of AM technology requires data management tools to collect, store, and share information through the product development lifecycle and across the material and machine value chain. To address the need for sharing data among AM developers and practitioners, an AM common data dictionary (AM-CDD) was first developed based on community consensus to provide a common lexicon for AM, and later standardized by ASTM International. Following the AM-CDD work, the development of a common data model (AM-CDM) defining the structure and relationships of the key concepts, and terms in the AM-CDD is being developed. These efforts have greatly facilitated system integrations and AM data exchanges among various organizations. This work outlines the effort to create the AM-CDD and AM-CDM, with a focus on the design of the AM-CDM. Two use cases are provided to demonstrate the adoption of these efforts and the interoperability enabled by the AM-CDM for different engineering applications managed by different types of database technology. In these case studies, the AM-CDM is implemented in two distinct formats to curate AM data from NIST—the first in XML from their additive manufacturing material database and the second in OWL from their 2022 AM bench database. These use cases present the power of the AM-CDM for data representation, querying, and seamless data exchange. Our implementation experiences and some challenges are highlighted that can assist others in future adoptions of the AM-CDM for data integration and data exchange applications.
25 March 2021 in Journal of Materials Engineering and Performance
Servo presses enable new types of forming motion profiles that can be used to stamp difficult materials, such as high strength steels. This paper presents an application of Bayesian statistics to intelligently select which motion profile maximizes the expected utility given the properties of the incoming material. Bayesian logistic regression was used in conjunction with expected utility to estimate manufacturing returns, which can be used to make informed process decisions. A use case is presented, which demonstrates that the Smart Forming Algorithm can increase expected returns by more than 20%.
The microstructure and 650 °C tensile properties of a compositionally graded IN718-René41 (718-R41) superalloy fabricated by laser blown-powder directed energy deposition (DED-LB/M) are investigated to understand structure–property relationships and baseline tensile properties. Digital Image Correlation (DIC), in situ neutron diffraction, and conventional characterization techniques are performed to study the as-built and heat-treated states. The applied heat treatment generates static recrystallization and equiaxed grains in 718-rich compositions, while R41-rich compositions remain partially or un-recrystallized possibly influenced by a higher MC carbide fraction (>0.5%). The yield strengths of the 718 and R41 sections in the heat-treated state are comparable to wrought forms but the graded compositions show weakness due to unoptimized heat treatment. Diffraction elastic constants first decrease and then increase along the 718-R41 composition gradient, while a small difference is observed between the as-built and heat-treated states and γ, γ′ phases. Overall, the compositionally graded region shows a smooth transition in the elastic properties. Grain-level load transfer from the (220) to (200) grains shows compositional dependence, and qualitatively agrees with DIC-measured macroscopic yield strength. Within the (200) grains, the γ/γ′ phases deform elastically until the γ phase yields and afterwards, the γ′ phase takes load from the γ phase.
14 February 2025 in Journal of Materials Engineering and Performance
Current approaches for additive manufacturing (AM) process qualification treat each AM system as unique. This results in substantial non-recurring engineering costs to scale production. Here, we test a low-cost, quality assurance-based alternative where variations in subsystem performance are used to predict variations in tensile and fatigue properties. Experiments spanning six builds and 300 specimens were designed to replicate historically measured ranges of subsystem performance. Specifically, differential pressure was used to modify the gas flow in the range of 1.1 to 3.3 m/s, and laser defocus adjustment was used to modify the laser spot size in the range of 72 to 87 micrometers. Each mechanical testing result was contextualized by the gas flow speed, laser spot size, and laser ellipticity measured at the position the specimen was built. Furthermore, the interdependence between subsystem performance and specimen thermal history was probed by including specimens with different support structures. All other parameters were chosen to minimize uncontrolled variation. Pearson’s correlation and ANOVA show the measured correlation between material properties and laser subsystem performance is generally stronger than the correlation with gas flow subsystem performance. Finally, we demonstrate that fatigue results were improved within a subsystem performance-based quality envelope.