Metasurfaces have been continuously garnering attention in both scientific and industrial fields, owing to their unprecedented wavefront manipulation capabilities using arranged subwavelength artificial structures. To date, research has mainly focused on the full control of electromagnetic characteristics, including polarization, phase, amplitude, and even frequencies. Consequently, versatile possibilities of electromagnetic wave control have been achieved, yielding practical optical components such as metalenses, beam-steerers, metaholograms, and sensors. Current research is now focused on integrating the aforementioned metasurfaces with other standard optical components (e.g., light-emitting diodes, charged-coupled devices, micro-electro-mechanical systems, liquid crystals, heaters, refractive optical elements, planar waveguides, optical fibers, etc.) for commercialization with miniaturization trends of optical devices. Herein, this review describes and classifies metasurface-integrated optical components, and subsequently discusses their promising applications with metasurface-integrated optical platforms including those of augmented/virtual reality, light detection and ranging, and sensors. In conclusion, this review presents several challenges and prospects that are prevalent in the field in order to accelerate the commercialization of metasurfaces-integrated optical platforms.

This paper describes a microdroplet merging device that can actively control the merging of various droplets under a wide range of flow conditions, using a simple structure. The microdroplets were trapped and merged in a wide chamber divided by pillars, and their behavior was controlled by two horizontal pneumatic microactuators. Hydrodynamic flow control by the actuation was evaluated numerically, and the trapping and merging of droplets were achieved experimentally and controlled via pressure applied to the microactuators. Furthermore, two independently generated droplets were merged under four different modes, ranging from no merging to four-droplet merging, with different ratios and volumes. The pneumatic actuators allowed not only the control of the number of merged droplets, but also a wide range of applied droplet volumes. The device was fabricated simply using a single-layer PDMS (polydimethylsiloxane) structure, and the continuous merging performance operated using only hydrodynamic flow control without any surfactant. Finally, chemical synthesis of a metal complex was performed by the droplet merging method. Crystallization of the complex was visualized in real time, and the synthesis was verified by ultraviolet-visible spectroscopy.

This paper presents a microfluidic system for the active and precise control of microdroplet division in a micro device. Using two horizontal pneumatic valves formed at downstream of bifurcating microchannel, flow resistances of downstream channels were variably controlled. With the resistance control, volumetric ratio of downstream flows was changed and water-in-oil microdroplets were divided into two daughter droplets of different volume corresponding to the ratio. The microfluidic channels and pneumatic valves were fabricated by single-step soft lithography process of PDMS (polydimethylsiloxane) using SU-8 mold. A wide range control of the daughter droplets’ volume ratio was achieved by the simple channel structure. Volumetric ratio between large and small daughter droplets are ranged from 1 to 70, and the smallest droplet volume of 14 pL was obtained. The proposed microfluidic device is applicable for precise and high throughput droplet based digital synthesis.

Conventional solution-phase synthesis of azo compounds is complicated by the need for precise pH and temperature control, high concentrations of pH control reagents, and by-product removal. The microdroplet synthesis method has solved these problems.