Carbon Capture, Utilization, and Storage (CCUS) stands as one of the effective means to reduce carbon emissions and serves as a crucial technical pillar for achieving experimental carbon neutrality. CO₂-enhanced oil recovery (CO₂-EOR) represents the foremost method for CO₂ utilization. CO₂-EOR represents a favorable technical means of efficiently developing extra-low-permeability reservoirs. Nevertheless, the process known as the direct injection of CO₂ is highly susceptible to gas scrambling, which reduces the exposure time and contact area between CO₂ and the extra-low-permeability oil matrix, making it challenging to utilize CO₂ molecular diffusion effectively. In this paper, a comprehensive study involving the application of a CO₂ nanobubble system in extra-low-permeability reservoirs is presented. A modified nano-SiO₂ particle with pro-CO₂ properties was designed using the Pickering emulsion template method and employed as a CO₂ nanobubble stabilizer. The suitability of the CO₂ nanobubbles for use in extra-low-permeability reservoirs was evaluated in terms of their temperature resistance, oil resistance, dimensional stability, interfacial properties, and wetting-reversal properties. The enhanced oil recovery (EOR) effect of the CO₂ nanobubble system was evaluated through core experiments. The results indicate that the CO₂ nanobubble system can suppress the phenomena of channeling and gravity overlap in the formation. Additionally, the system can alter the wettability, thereby improving interfacial activity. Furthermore, the system can reduce the interfacial tension, thus expanding the wave efficiency of the repellent phase fluids. The system can also improve the ability of CO₂ to displace the crude oil or water in the pore space. The CO₂ nanobubble system can take advantage of its size and high mass transfer efficiency, among other advantages. Injection of the gas into the extra-low-permeability reservoir can be used to block high-gas-capacity channels. The injected gas is forced to enter the low-permeability layer or matrix, with the results of core simulation experiments indicating a recovery rate of 66.28%. Nanobubble technology, the subject of this paper, has significant practical implications for enhancing the efficiency of CO₂-EOR and geologic sequestration, as well as providing an environmentally friendly method as part of larger CCUS-EOR.

Aiming at the characteristics of high viscosity and poor fluidity of high waxy ordinary heavy oil, a Janus silica-based nanosheet composite viscosity reducer was designed and prepared in this paper. The viscosity reducer was assembled by asymmetric Gemini viscosity reducer and silica nanosheets through dehydration condensation reaction, and its structure was verified by FT-IR, ¹HNMR, XPS and DLS. The viscosity reduction performance, emulsion stability, interfacial tension and flow performance of the viscosity reducer were systematically evaluated by taking heavy oil with wax content of 35.7% and viscosity of 237 mPa·s at 30 °C as the research object. The results showed that, at an oil-to-viscosity-reducer-solution volume ratio of 3:7 and a viscosity reducer mass fraction of 0.3%, the maximum viscosity reduction rate reached 94.5% at 30 °C, calculated relative to the viscosity of the dehydrated original heavy oil. The oil–water interfacial tension was significantly reduced, and the 24 h bleeding ratio, defined as the volume percentage of separated water relative to the initial aqueous phase volume, was only 7.3%, indicating good emulsion stability. The core flow experiment shows that the resistance coefficient is reduced to the lowest at 0.3% concentration, and the seepage capacity is significantly improved. The analysis of total hydrocarbon gas chromatography showed that the content of high-carbon wax components in the C₂₃-C₃₀ range decreased by 4.79 percentage points after treatment, indicating that the viscosity reducer preferentially interacted with high-carbon wax molecules and promoted wax-crystal dispersion, thereby weakening the three-dimensional wax-crystal network. The viscosity reducer has the synergistic effect of dispersing wax crystals, reducing interfacial tension and stabilizing emulsification, which provides a low-cost and high-performance technical approach for the efficient exploitation of high waxy ordinary heavy oil.