In order to explore the possibilities of increasing the hydrophilicity of carbon-based adsorbents, catalysts, or electrode materials in aqueous solutions, the oxidation of wood-based activated biochar using H2O2 was investigated. The properties of oxidized activated biochar obtained at different activation temperatures (600, 700, and 800 °C) and H2O2 oxidized for 15–180 min were investigated using the characteristics of surface functionality, elemental composition, porous structure, contact angle measurements, FTIR spectroscopy, and immersion calorimetry. It was observed that the optimal oxidation time was different for each sample depending on activation temperature, and the degree of oxidation can be tailored by changing the oxidation time. The course of oxidation depends on the degree of graphitization and functionalization, determined by the activation temperature. It was established that the highest degree of oxidation and increase in wettability is observed for samples with the lowest degree of activation obtained at a temperature of 600 °C.
Biomass valorization into carbon-rich materials has attracted increasing attention as a sustainable alternative to fossil-based resources. This work is devoted to the study of hydrothermal carbonization (HTC) of spruce lignocellulose liquid pyrolysis products (the target product of the pyrolysis is levoglucosan)—bio-oil (B). In addition, the fractionated B compounds, including the phenol-enriched fraction remaining after anhydrosugar removal, were evaluated as potential precursors for hydrochar production. Hydrochars were produced at 200, 250, and 300 °C and characterized using SEM, revealing that spherical morphology agglomerates can also be obtained from the phenol-enriched fraction. The chemical composition and structural evolution of the hydrochars were investigated by Py-GC/MS, elemental analysis, and FTIR, demonstrating the significant influence of both precursor composition and carbonization temperature on hydrochar chemistry. In addition, the organic compounds in the process water were analyzed using UHPLC and complementary chemical analysis. The results show that the chemical composition of the precursor strongly influences the yield, morphology, and chemical composition of the obtained hydrochar.