Lakes are complex ecosystems affected by various anthropogenic influences, including vessel-induced waves. Detecting these waves by a micro-electro-mechanical system (MEMS)-based inertial measurement unit (IMU) equipped on a buoy-based monitoring system can help assess their impacts and support developing sustainable water ecosystem management. This study evaluated and optimized the measurement accuracy of a wave-monitoring system designed to detect waves generated by recreational vessels on lakes. In laboratory tests, we analyzed and, separately, compared the hydraulic behavior of different buoy configurations and assessed the IMU integration in field test campaigns. Results showed that all tested buoys exhibited a mean average absolute deviation (AAD) of less than 20 mm, while the IMU integration achieved an overall AAD of mm. For small waves, characterized by wave heights < 50 mm, the IMU’s AAD corresponds to the buoy’s AAD. However, for larger waves, the buoy’s AAD often significantly exceeds that of the IMU, indicating that the hydraulic performance of the buoy limits measurement accuracy in case of greater waves. The best-performing buoy configuration in laboratory tests achieved a measurement accuracy (mean AAD) below 10 mm (or of wave height), confirming the suitability of the developed wave buoys for a vessel-induced wave-monitoring system on lakes.
This paper deals with the concept of a GNSS monitoring network, which fulfills requirements in relation to sustainability, cost efficiency and flexibility. For the proposed approach, the hardware of the GNSS monitoring stations should be reduced to a minimum. Therefore, Remote Radio Head sensors or especially RF Front-Ends, which are already used in the field of GNSS, should be used. In this concept, GNSS network stations are equipped with an antenna, an RF Front-End, and hardware for data transfer (raw I&Q samples) to a central processing facility. The idea is to realize a collaborative processing of all receivers with a Multi-Receiver-Vector Tracking (MRVT) algorithm in one single Software-Defined GNSS receiver (SDR).