Nikhil Shylaja Prakash

Mr. Nikhil Shylaja Prakash

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2024 in Bioresource Technology
Verified
Journal Article
Open access
NPNikhil Shylaja Prakash
Nikhil Shylaja Prakash
PMPeter Maurer
Peter Maurer
HHHarald Horn
Harald Horn
AHAndrea Hille-Reichel
Andrea Hille-Reichel
In this study, lab-scale, bench-scale, and pilot-scale experiments were carried out to optimize short-chain fatty acids production from primary sludge. Batch tests showed the requirement of short retention times and semi-continuous operation mode showed a plateau of maximum daily productivity at 36-hours hydraulic retention time with minimal methanation. Optimization from pH 5 to pH 10 at 36 h-hydraulic retention time under long-term semi-continuous operating mode revealed that production of short-chain fatty acids was pH dependent and highest yields could be achieved at pH 7 by establishing optimum redox conditions for fermentation. Pilot-scale experiments at 32 °C showed that daily productivity (3.1 g∙Lreactor-1∙dHRT-1) and yields (150 mg∙gVS-1; OLR = 21 gVS∙Lreactor-1∙dHRT-1; pH 7) of short-chain fatty acids could be significantly improved, specifically for acetic and propionic acids. From these results, a robust dark fermentation step for recovery of valuable products from the solids treatment step in a biorefinery can be achieved.

11 January 2025 in Membranes
Verified
Journal Article
Open access
PDF file
NPNikhil Shylaja Prakash
Nikhil Shylaja Prakash
PMPeter Maurer
Peter Maurer
HHHarald Horn
Harald Horn
FSFlorencia Saravia
Florencia Saravia
AHAndrea Hille-Reichel
Andrea Hille-Reichel
Short-chain fatty acids (SCFAs) are valuable metabolic intermediates that are produced during dark fermentation of sludge, which, when capitalized on, can be used as chemical precursors for biotechnological applications. However, high concentrations of solids with SCFAs in hydrolyzed sludge can be highly detrimental to downstream recovery processes. This pilot-scale study addresses this limitation and explores the recovery of SCFAs from primary sludge into a particle-free permeate through a combination of chamber filter-press (material: polyester; mesh size: 100 µm) and cross-flow microfiltration (material: α-Al2O3; pore size: 0.2 µm; cross-flow velocity: 3 m∙s−1; pressure = 2.2 bars). Firstly, primary sludge underwent dark fermentation yielding a hydrolyzate with a significant concentration of SCFAs along with total solids (TS) concentration in the range of 20 to 30 g∙L−1. The hydrolyzate was conditioned with hydroxypropyl trimethyl ammonium starch (HPAS), and then dewatered using a filter press, reducing TS by at least 60%, resulting in a filtrate with a suspended solids concentration ranging from 100 to 1300 mg∙L−1. Despite the lower suspended solids concentration, the microfiltration membrane underwent severe fouling due to HPAS’s electrostatic interaction. Two methods were optimized for microfiltration: (1) increased backwashing frequency to sustain a permeate flux of 20 L∙m−2∙h−1 (LMH), and (2) surface charge modification to maintain the flux between 70 and 80 LMH. With backwashing, microfiltration can filter around 900 L∙meff−2 (without chemical cleaning), with the flux between 50 and 60 LMH under semi-continuous operation. Evaluating the particle-free permeate obtained from the treatment chain, around 4 gCSCFAs∙capita−1∙d−1 can be recovered from primary sludge with a purity of 0.85 to 0.97 CSCFAs∙DOC−1.