Mesmo diante do apelo ecológico pelo reaproveitamento de resíduos, os produtos de irrigação, como é caso de tubos porosos oriundos de pneus reciclados, devem ser avaliados quanto à sua viabilidade técnica. A caracterização hidráulica é um dos requisitos necessários para tal finalidade além de fornecer dados essenciais ao dimensionamento de sistemas de irrigação. Diante do exposto objetivou-se caracterizar tubos porosos quanto aos fatores perda de carga, vazão em função da pressão e variação de vazão. Foram utilizadas cinco amostras de tubo para determinação da perda de carga e oito para a determinação da curva vazão-pressão e do coeficiente de variação, sendo ensaiados sete níveis de pressão. A perda de carga foi determinada com tubo impermeabilizado e com distribuição de vazão para diferentes vazões. O tubo poroso apresentou coeficiente de variação de vazão em torno de 5%, considerado resultado satisfatório. O modelo potencial não se ajustou aos dados da curva característica vazão-pressão. Os fatores de atrito e de redução de perda de carga apresentaram comportamento divergente da literatura em que outros fatores, como a variação do diâmetro, devem ser estudados com maiores detalhes.

In this study, a field evaluation of the performance of an irrigation controller mechanically actuated by soil-water tension (SWT) was performed. The controller employs a tensiometer used as a sensor of SWT to directly control a mechanically actuated hydraulic valve. Six controllers were installed in an orchard to control the irrigation for six rows of plants over 64 days. Each controller controlled the irrigation of one lateral drip line. The drip irrigation system was gravity-fed from a water source placed 7 m above the soil surface. The SWT and the pressure in each lateral line were measured to evaluate the performance of the controllers. All the controllers tested in the field autonomously initiated and terminated the irrigation during the evaluation. Irrigation events were initiated when values close to the set soil-tension values were reached and were terminated at lower soil-tension values. As the SWT in the root zone was maintained close to the setup threshold plus 20% tolerance for at least 90% of the evaluation period, the performance of the controllers was considered satisfactory. The proposed controller was shown to be functional and was operated effectively for an SWT range of up to 30 kPa, which is commonly encountered under high-frequency irrigation conditions.

Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s^-1 for a vertical-axis current meter and 2.3 m s^-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

Diversified cropping systems offer an alternative to sustainable agriculture, but they present high spatial variability. This study aims to develop and evaluate an automated irrigation system and a variable-rate water application for areas with diversified vegetable crops. The prototype comprises a mobile drip line, a winding reel, and an electronic control system. The drip line irrigates plants individually, with irrigation depths along the beds controlled by the displacement speed and between beds by adjusting the timing of electrical pulses to activate the water flow control valves. To evaluate the drip line, irrigation depths were defined for different crops, followed by performance assessments, which included evaluating the uniformity (Christiansen’s Uniformity Coefficient—CUC) of the line under constant and variable rates. A hydraulic evaluation of the system was also carried out, as well as the calculation of the potential irrigable area. The drip line showed CUC ≥96% for depths under a constant rate and 95% for depths under a variable rate. The application efficiency reached 93.4% for a degree of suitability of 83%, considering variable depths along and between beds. The potential irrigable area obtained was 360 m² day⁻¹. The developed drip line effectively meets the spatial variability of crop water requirements in diversified cropping systems by adopting the variable-rate irrigation technique. The control of irrigation depth through valve activation via electrical pulses allows for the application of variable depths between the beds.

The objective of this study was to develop and evaluate an irrigation controller that was mechanically actuated by soil-water tension within laboratory conditions. The controller was designed and constructed using readily available hydraulic fittings and other componentry. The main components of the controller were a tensiometer; a rubber diaphragm that moves according to the variation in tension inside of the tensiometer; an activation rod that transfers the movement from diaphragm to the switch valve; and a steel spring that regulates the activation of soil water tension. Six irrigation controller samples were tested in the laboratory to evaluate the mechanical performance and component forces required to activate the controllers. The relationship between spring adjustment and soil water tension required to open the irrigation valve was linear with a gradient ranging from 1.10 to 1.41 kPa mm-1 and a coefficient of variation of 9.2%. However, differences observed in the activation of the soil water tension could also be reduced by individual controller calibration. The calibration of the soil water tension required to initiate irrigation was easily set by adjusting the spring. The proposed controller is functional, simple to use, can be easily adjusted, and does not require electricity to operate.