This work focuses on the use of coconut shell powder as filler in natural rubber. Coconut, one of the food crops in the world, generates large amounts of waste material namely coconut shell. Modified and unmodified coconut shell powder–natural rubber composites with varying particle size and dosages were prepared by an open mill-mixing technique. The processing characteristics and the curing behavior of the composites were determined by Monsanto Rheometer. The technological performance was done by analyzing the tensile strength, tear strength and hardness of the vulcanizates. The swelling studies were carried out to observe the crosslink density and the reinforcement ability of the filler on natural rubber. The observed variation in mechanical properties has been supported by the fractography of the composites obtained by scanning electron microscopy. The results of the study show that the coconut shell powder is most effective filler in natural rubber at 10 parts per hundred loading. Reinforcement ability of modified coconut shell powder is more when compared to unmodified coconut shell powder, therefore modified coconut shell powder–natural rubber composites show better physicomechanical properties. Incorporation of coconut shell powder into natural rubber matrix enhances the thermal properties of the natural rubber—coconut shell powder composites.
Conducting polymer composites of polypyrrole (PPy) and silver doped nickel oxide (Ag-NiO) nanocomposites were synthesised by in situ polymerisation of pyrrole with different contents of Ag-NiO nanoparticles. The formation of nanocomposites were studied by Fourier transform infrared (FTIR) and UV–vis spectroscopy, field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and AC and DC conductivity measurements. The sensitivity of ammonia gas through the nanocomposite was analysed with respect to different contents of nanoparticles. Spectroscopic studies showed the shift in the absorption bands of polymer nanocomposite than that of pure PPy indicating the strong interaction between the nanoparticles and polymer chain. FESEM revealed the uniform dispersion of nanoparticles with spherically shaped metal oxide particles in PPy matrix. The XRD pattern indicated a decrease in amorphous domain of PPy with increase in loading of nanoparticles. The higher thermal stability and glass transition temperature of polymer nanocomposites than that of pure PPy were revealed from the TGA and DSC respectively. The dielectric properties, DC and AC conductivity of nanocomposites were much higher than PPy and these electrical properties increases with the loading of nanoparticles. The nanocomposites showed an enhancement in sensitivity towards ammonia gas detection than PPy.