This paper presents a droplet position sensing circuit designed for thin film transistor active-matrix digital microfluidics. The presented pixel design facilitates simultaneous implementation of droplet driving and position sensing functions. An 8x8 array was fabricated with standard thin film transistors compatible to mainstream display backplane technology. Measured results indicate a difference in output voltage of approximately 4 V between deionized water and air, demonstrating ample precision for accurate droplet position sensing. The driving and readout capability of the array has also been experimentally verified. The approach presented here is suitable for integration of TFT active-matrix digital microfluidics, offering a solution to enhance the efficiency and precision of droplet manipulation.
With the continuous expansion of pixel arrays in digital microfluidics (DMF) chips, precise droplet control has emerged as a critical issue requiring detailed consideration. This paper proposes a novel capacitance-based droplet sensing system for thin-film transistor DMF. The proposed circuit features a distinctive inner and outer dual-pixel electrode structure, integrating droplet driving and sensing functionalities. Discharge occurs exclusively at the inner electrode during droplet sensing, effectively addressing droplet perturbation in existing sensing circuits. The circuit employs a novel fan-shaped structure of thin-film transistors. Simulation results show that it can provide a 48 V pixel voltage and demonstrate a sensing voltage difference of over 10 V between deionized water and silicone oil, illustrating its proficiency in droplet driving and accurate sensing. The stability of threshold voltage drift and temperature was also verified for the circuit. The design is tailored for integration into active matrix electrowetting-on-dielectric (AM-EWOD) chips, offering a novel approach to achieve precise closed-loop control of droplets.