In recirculating aquaculture systems (RAS), particulates (including feces, uneaten feed, bacteria, and algae) can cause several problems, in that they may harbor pathogens, can physically irritate the fish, and upon decomposition, release ammonia and consume oxygen. Mechanical filters, foam fractionators, and other engineered devices are used to remove particles quickly from aquaculture systems, in order to improve fish health and decrease the load on biofilters and oxygenators. Ozone is used in RAS as a disinfectant, to remove organic carbon, and also to remove turbidity, algae, color, odor and taste. Ozone can effectively inactivate a range of bacterial, viral, fungal and protozoan fish pathogens. But the effectiveness of ozone treatment depends on ozone concentration, length of ozone exposure (contact time), pathogen loads and levels of organic matter. In spite of ozone is a very effective oxidizing agent, higher ozone concentrations are a risk to cultured fish stocks causing gross tissue damage and stock mortalities, and also are a risk to bacterial films on the biofilter.
In recent years, increasing attention has been focused on the safety of foods, and in particular on the intervention methods to reduce and eliminate human pathogens from fresh product, especially fresh seafood. Traditional technology utilizes water with or without a sanitizing agent to wash fresh seafood. Chlorine is the most widely used sanitizing agent available for fresh product, but it has a limited effect in killing bacteria on seafood surfaces. An alternative treatment is being sought to improve food safety. Many research and industrial trials are underway to validate the use of ozone in the food industry. This article intends to show a clean technology to be applied in seafood industry and to show that many studies must be done to demonstrate the best concentrations and the best methods of ozone applications in diverse seafood species, so that the governments of all the countries can approve their application in the fishing industry.
The efficiency of ozonated water as a disinfectant for removing microorganisms in freshwater fish was investigated. Nile tilapia samples (whole and fillets) were immersed in cold water (11°C), without ozone (0 ppm—control) and with ozone (0.5, 1.0, 1.5 ppm) for 0, 5, 10, and 15 min. Microbiological and physicochemical parameters were evaluated. The most efficient ozone concentration to reduce microbiological contamination of the whole tilapia was 1.5 ppm (88.25% of reduction) at 15 min of contact. Ozonated water at 1 and 1.5 ppm showed the greatest reduction (77.2 and 79.49%, respectively) in the fillet treatment. Neither the pH nor the color of fillets was influenced by ozonated water treatment; however, a small triggering of lipid oxidation process was observed by the increase in the TBARS value. These results prove that ozonated water was effective in reducing the microbial load and maintain the quality of fish, with low cost. As an environmentally friendly disinfectant, ozone now is being studied as an alternative to chlorine sanitizers in many segments of the food industry. The use of ozone as a superficial disinfectant of meat surfaces has been reported in the fish industry. Few studies on the use of ozone in farmed freshwater fish have been reported. Ozonated water treatments improve the quality and extend the shelf life of fish. We evaluated and proved the microbial efficiency of ozonated water during Nile tilapia processing, and indicate that fillet quality was not adversely affected by ozone treatment.