We demonstrated a method to construct high efficiency saturable absorbers based on the evanescent light field interaction of CVD monolayer graphene deposited on side-polished D-shaped optical fiber. A set of samples was fabricated with two different core-graphene distances (0 and 1 μm), covered with graphene ranging between 10 and 25 mm length. The mode-locking was achieved and the best pulse duration was 256 fs, the shortest pulse reported in the literature with CVD monolayer graphene in EDFL. As result, we find a criterion between the polarization relative extinction ratio in the samples and the pulse duration, which relates the better mode-locking performance with the higher polarization extinction ratio of the samples. This criterion also provides a better understanding of the graphene distributed saturable absorbers and their reproducible performance as optoelectronic devices for optical applications.
For the first time, we demonstrated the fabrication of mechanically exfoliated molybdenum disulfide (MoS2) samples deposited onto a D-shaped optical fiber. The MoS2 exfoliated flakes were deposited onto a stacked of 1.2 µm PVA (polyvinyl alcohol) and 300 nm PMMA (polymethyl methacrylate) layers and then transferred directly onto a side polished surface of D-shaped optical fiber with polishing length of 17 mm and no distance from the fiber core. The sample exhibited a high polarization performance as a polarizer with relative polarization extinction ratio of 97.5%. By incorporating the sample as a saturable absorber in the Erbium-doped fiber laser (EDFL), bandwidth of 20.5 nm and pulse duration of 200 fs were generated, which corresponded to the best mode-locking results obtained for all-fiber MoS2 saturable absorber at 1.5 µm wavelength.
We present high mode-locking performances from an erbium-doped fiber laser (EDFL) by using graphene oxide (GO) and reduced graphene oxide (r-GO) as saturable absorbers (SA) deposited onto the polished surface of a D-shaped optical fiber. The samples were prepared with different concentrations and its characterization was performed by using an optical microscope, a Raman spectrometer, nonlinear saturable absorption measurements, polarization setup, and laser mode-locking analysis. As a 1550-nm polarizer, the best GO (r-GO) samples exhibited higher polarization extinction ratio (PER) of 7.94 (7.65) dB, corresponding to 84 (83) %, both showing similar graphene TE absorption behavior. In a managed-intracavity dispersion laser, broadest bandwidths of 27.2 and 24.1 nm and the corresponding shortest pulse duration of 190 fs could be generated when incorporating the SA with high modulation depth (above 20%), being so far the best mode-locking results ever reported in the literature for GO and r-GO SA onto D-shaped optical fibers in EDFL.
15 January 2018 in Journal of Lightwave Technology
For the first time, we report a femtosecond mode-locked Erbium-doped fiber laser (EDFL) by using mechanically exfoliated graphite deposited onto a D-shaped optical fiber. The exfoliated graphite flakes were deposited onto a stacked polyvinyl alcohol/polymethyl methacrylate thick layers, and then transferred directly to the polished surface of the D-shaped optical fiber. The characterization of the exfoliated graphite sample was performed by using optical microscope and Raman spectroscopy. By measuring its polarization performance, polarization relative extinction ratio about 5.30 dB (70%) was obtained, which resulted in the broadest bandwidth of 21 nm and the shortest pulse duration of 220 fs generation as saturable absorber (SA) into an EDFL cavity. For our knowledge, these are the best mode-locking performances ever reported in the literature for all-fiber-based graphite SA in EDFL.
We present a study on the characterization and quality evaluation of all-fiber chemical vapor deposition (CVD) graphene saturable absorber samples for Erbium-doped fiber laser (EDFL) mode locking. Optical fiber end faces covered by CVD graphene were analyzed by Raman spectroscopy, and classification criteria related to graphene Raman bands properties were adopted in order to evaluate samples quality. The analysis revealed that for all samples, the fiber core was 100% covered by graphene, with 88% average monolayer graphene coverage, and 82% low defect graphene coverage. Graphene samples were used as saturable absorbers in EDFL, and soliton-like pulses as short as 599 fs were generated, with average pulse duration of 620 ± 10 fs among all samples.