The malalignment of teeth is treated classically by metal braces with alloy wires, which has an unfavorable influence on the patients appearance during the treatment. With the development of digitization, computer simulation and three-dimensional (3D) printing technology, herein, a modern treatment was tried using clear polymeric aligners, which were fabricated by molding polyurethane films via thermoforming on the 3D-printed personalized dental models. The key parameters of photocurable 3D printing of dental models and the mechanical properties of the clear aligner film material were examined. The precision of a 3D-printed dental model mainly relied on characteristics of photocurable resin, the resolution of light source and the exposure condition, which determined the eventual shape of the molded clear aligner and thus the orthodontic treatment efficacy. The biocompatibility of the polyurethane film material was confirmed through cytotoxicity and hemolysis tests in vitro. Following a series of 3D-printed personalized dental models and finite element analysis to predict and plan the fabrication and orthodontic processes, corresponding clear aligners were fabricated and applied in animal experiments, which proved the efficacy and biocompatibility in vivo. Clinical treatments of 120 orthodontic cases were finally carried out with success, which highlights the advantage of the clear aligners as an esthetic, compatible and efficient appliance.
8 June 2021 in Journal of Shanghai Jiaotong University (Science)
Mouth breathing among children represents a prevalent yet frequently overlooked health concern closely associated with various adverse outcomes, including
Prefabricated myofunctional appliance can guide tooth eruption, improve dentition alignment, correct myofunctional disorders and harmful oral habits. However, its application to skeletal discrepancy may result in unsatisfactory tooth inclination. This study aimed to construct a novel appliance with overjet design to avoid this side effect and investigated its shape and mechanical changes under occlusion using three-dimensional finite element method. We established three samples of prefabricated myofunctional appliances. The first one was edge to edge without overjet, and the outer shield of both jaws were flattened. The second one was 3 mm overjet with stepped the outer shield. The last one was 3 mm overjet, and the outer shield of both jaws were flatted, which meant the front wall of lower jaw was strengthened with bumper, termed as lower bumper. A complete dentition model was applied to the study. 150 N occlusal force was applied to each type of appliance and the deformation displacement and the changes in stress was recorded. The deformation was significant in the incisors regions, especially in the vertical and lateral dimensions. The maximum displacements of 3 mm overjet with step shield group were 7.08 mm (vertical), 3.99 mm (lateral), and 2.90 mm (sagittal), while it decreased to 3.92 mm(vertical), 1.94 mm (lateral), and 1.55 mm (sagittal) in overjet with bumper group. Moreover, the upper molar regions exhibited higher vertical and sagittal displacement in 3 mm overjet with step shield group, which were 3.03 mm (vertical) and 1.99 mm (sagittal), and the bumper design could decrease the maximum displacement to 1.72 mm (vertical) and 0.72 mm (sagittal). In addition, the Von Mises stress of appliances was analyzed, and results indicated that 3 mm overjet with step shield generated higher stress than other groups, with the maximum Von Mises stress was 0.9387 MP, which were 0.5858 and 0.5657 MP in edge to edge group and 3 mm overjet with lower bumper group, respectively. The prefabricated myofunctional appliances may cause deformation during occlusion. Compared to step shield group, the application of lower bumper exhibited better resistance to occlusal force.
The objective of this study was to investigate the effects of parathyroid hormone on tooth movement and uncover its mechanism from a metabolic perspective. The influences of parathyroid hormone on PDLCs osteogenic differentiation and monocyte osteoclastic differentiation were investigated. According to the RNA-seq analysis, glucose metabolism has been discussed subsequently. Mouse maxillary first molar mesial movement model was constructed to estimate the effects of parathyroid administration on alveolar bone remodelling and tooth movement. Parathyroid administration accelerated mouse maxillary first molar mesial movement by promoting alveolar bone remodelling. The expression of osteogenic markers and the number and surface of osteoclast cells were promoted. Parathyroid hormone administration facilitates PDLCs osteogenic differentiation and monocytes osteoclastic differentiation synchronously. RNA-seq indicated that parathyroid administration mainly affects the metabolism and cellular signalling of PDLCs. Parathyroid administration enhanced glucose uptake, glucose consumption and aerobic glycolysis of PDLCs while exhibiting no obvious effects on the Krebs cycle and oxidative phosphorylation. Moreover, mitochondrial fission of PDLCs was promoted after parathyroid administration. Furthermore, results indicated that parathyroid administration promoted the expression of GLUT1, HK1 and LDHA. Inhibition of mitochondrial midzone fission partially alleviated the osteo-inductive effects of parathyroid hormone. Collectively, parathyroid hormone regulates PDLCs aerobic glycolysis and mitochondrial fission to promote alveolar bone remodelling, and metabolic reprogramming is of vital importance in the processes of orthodontic tooth movement. This study elucidates the role of metabolites associated with parathyroid hormones in tooth movement, and lays a foundation for regulating the speed of tooth movement by monitoring their activity.
8 June 2021 in Journal of Shanghai Jiaotong University (Science)