Dry anaerobic digestion (DAD) is an attractive method for simultaneous organic waste disposal and bioenergy recovery. DAD has the problems of low methane yields, low reaction rates, and easy inhibition due to its limited mass transfer and heat transfer. In this work, two methods of mechanical stirring and percolate recirculation were compared regarding their capacities of improving the mass transfer and enhancing the performances of DAD in batch experiments with sorghum stalks as a substrate. The cumulative biogas yield and system stability were investigated when the stirring linear velocity was 0 cm/s, 22 cm/s, 44 cm/s, 66 cm/s, and 88 cm/s. When the stirring linear velocity was 88 cm/s, the cumulative biogas yield and methane content were highest. The computational fluid dynamics (CFD) simulation indicated that the shearing force near the stirring shaft was largest. When the linear velocity of the stirring paddle was 88 cm/s, the shearing force at a radial distance close to center was about −140 N/m2. When the ratio of the material stacking height to the reactor diameter (H/D) was 3:2, the AD showed the best performance. A higher material stacking height promoted the contact between the microorganisms and the substrate and enhanced the biogas production. By combining percolate recirculation and mechanical stirring, the cumulative biogas yield increased by 28% compared with the static DAD process because of the promotion of mass transfer in the DAD.
17 February 2025 in Biomass Conversion and Biorefinery
The influence of adding surfactants on the performance of high-solid anaerobic digestion of horticultural waste was extensively investigated in batch systems. Adding Tween series and polyethylene glycol series non-ionic surfactants had positive effects on biogas production, resulting in 370.1 mL/g VS and 256.6 mL/g VS with Tween 60 and polyethylene glycol 300 at a surfactant-to-grass mass ratio of 0.20, while the biogas production of anaerobic digestion without surfactants was 107.54 mL/g VS. The optimal and economically feasible choice was adding Tween 20 at a ratio of 0.08 g/g grass in high-solid anaerobic digestion. A kinetics model reliably represented the relationship between surfactant concentration and biogas production. The mechanism of surfactants working on lignocellulose was investigated. The improvement in high-solid anaerobic digestion by adding surfactants was attributed to the interaction between lignocelluloses and surfactants and the extraction of biodegradable fractions from the porous structure. An economic analysis showed that adding Tween 20 was likely to make a profit and be more feasible than adding Tween 60 and polyethylene glycol 300. This study confirms the enhancement in biogas production from horticultural waste by adding non-ionic surfactants.
Co-gasification of biomass and coal offers a strategic approach to enhance the sustainability of energy resources by exploiting the inherent synergies between various biomass components (cellulose, hemicellulose, and lignin) and coal. This study investigates the co-gasification in a downdraft fixed-bed reactor, focusing on the impacts on gas yield, calorific value, and carbon structure transformations. Thermogravimetric analysis reveals that the thermal decomposition kinetics of the biomass components differ significantly, with cellulose and hemicellulose enhancing gas yield and calorific value, while lignin shows an inhibitory effect on these parameters. Cellulose improves the gasification process, particularly at a 50.00wt.% blending ratio, optimizing both the calorific value and CO production by 20.32% and 45.75%, respectively, over theoretical values. In contrast, lignin inclusion at a 70.00wt.% ratio decreases the calorific value and CO production by 6.44% and 11.21%, respectively. Additionally, hemicellulose is found to catalytically enhance CO2 conversion, with a maximum increase of 45.99% at a 70.00wt.% ratio. The study elucidates the differential impacts of each biomass component on the co-gasification process and underscores the potential of optimizing biomass blends to maximize the efficiency and sustainability of energy production.