Bi2WO6 assembled by flower-like microspheres and nanosheets were controllably synthesized through a one-step hydrothermal approach. Multiple technologies, including X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and UV–Vis diffuse reflectance spectrum (UV–Vis), were carried out to characterize the as-synthesized samples. The photocatalytic efficiency of Bi2WO6 synthesized with a series of temperature and pH values shows different morphologies and photocatalytic properties. The photocatalyst (Bi2WO6) synthesized at 220 °C and pH of 7 exhibited the best photocatalytic performance, with the methylene blue (MB) degradation approaching 91.6% after reaction time of 60 min. Free radical capture experiments indicate that •OH is the primary reactive species in the methylene blue (MB) degradation reaction, h+ and •O2− contribute negligible influence, while the addition of H2O2 significantly improves the photocatalytic activity of Bi2WO6. Biodegraded poplar preconditioning refiner chemical alkaline peroxide mechanical pulp wastewater (PPW) was treated over Bi2WO6 under UV light (Bi2WO6/UV/H2O2); chemical oxygen demand (CODCr) and color degradation rate were 85.8% and 92.0%, respectively. These results show that Bi2WO6 semiconductors can be introduced as an efficient and stable photocatalyst for industry wastewater treatment.
Anaerobic wastewater treatment technology has been intensively and extensively investigated in the industry and scientific research. Inspired by the advantages of multi-stage and multi-phase anaerobic reactor technology (SMPA) in recent years, a three-stage anaerobic reactor (3S-AR) was designed and applied to treat poplar chemical–mechanical pulp wastewater, and various operation parameters, including the volume loading rate (VLR), hydraulic retention time (HRT), ascending velocity, reflux ratio, pH and temperature of the 3S-AR, were optimized to evaluate the reactor’s removal efficiency for poplar wastewater. The properties of anaerobic granular sludge and the composition of wastewater were also characterized to assess microorganism growth and pollutant migration. Results show that the COD removal rate was over 75% with a volume loading rate range of 15–25 gCOD/(L·d) in the 3S-AR; the hydraulic retention time was also found to be an important factor affecting the performance of the 3S-AR reactor. The volume loading rate and degradation efficiency of the 3S-AR reactor are higher than those of the up-flow anaerobic sludge blanket (UASB) reactor. Microorganism separation can be achieved in the 3S-AR, which is conducive to the growth and methanogenesis activity of bacteria, thereby leading to enhanced removal and buffering efficiency. After treatment in the 3S-AR, the main pollutants of poplar wastewater were benzene aromatic acids and long-chain esters, which do no biodegrade easily; in contrast, most of the fatty acid substances with small molecules were completely degraded.