The combined disinfection process of ultraviolet and sodium hypochlorite has more advantages than the single disinfection method in reducing the disinfectant dosage, shortening the reaction time, and resisting the impact of water quality changes and inhibiting the light reactivation of microorganisms. Given this, using the secondary effluent of a sewage plant as the research object, the disinfection efficiency of the combined process of ultraviolet and sodium hypochlorite was investigated. The experimental results showed that the inactivation effect of UV followed by sodium hypochlorite on fecal coliform and the inhibition of microbial photoreactivation was more significant than that of simultaneous disinfection of UV and sodium hypochlorite disinfection. When the UV dose was 24 mJ/cm², after disinfection with UV followed by sodium hypochlorite, only 1 mg/L of sodium hypochlorite was required to be added, and a contact reaction time of 1 min for the fecal coliform index to meet the first-Class A emission standard. After disinfection, the effluent’s maximum reactivation rate of fecal coliform was 26.96%. However, the simultaneous disinfection of ultraviolet and sodium hypochlorite required the addition of 3 mg/L of sodium hypochlorite. After disinfection, the maximum reactivation rate of the fecal coliform group reached 30.81%.

In recent years, due to the abuse of pharmaceuticals and personal care products (PPCPs), many refractory trace organic compounds (TrOCs) have been transferred into natural water bodies, posing significant challenges to the water environment. On the other hand, advanced oxidation processes (AOPs) are cleaner and more efficient than traditional biochemical degradation processes. Among them, the combined ozone/persulfate advanced oxidation process (O₃/PMS) based on sulfate radicals (SO₄^•−) and hydroxyl radicals (•OH) has developed rapidly in recent years. Thus, this paper summarised the reaction mechanism of O₃/PMS and analysed its research and application progress in drinking water treatment. In addition, the process’s operation characteristics and current application scope were discussed, and the generation ways and inhibition methods of bromate and halogenates, by-products in the oxidation process, were summarised, which had a specific reference value for further research on O₃/PMS process.

Tetracycline (TC) contamination in water is one of the key issues in global environmental protection, and traditional water treatment methods are difficult to remove antibiotic pollutants.Therefore, efficient and environmentally friendly treatment technologies are urgently needed. In this study, activated persulfate (PS) using a biochar-loaded nano zero-valent iron (BC-nZVI) advanced oxidation system was used to investigate the degradation effect, influencing factors, and mechanism of TC. BC-nZVI was prepared using the liquid-phase reduction method, and its structure and properties were analyzed by various characterization means. The results showed that nZVI was uniformly distributed on the surface or in the pores of BC, forming a stable complex. Degradation experiments showed that the BC-nZVI/PS system could degrade TC up to 99.57% under optimal conditions. The experiments under different conditions revealed that the iron-carbon ratio, dosing amount, PS concentration, and pH value all affected the degradation efficiency. Free radical burst and electron paramagnetic resonance (EPR) experiments confirmed the dominant roles of hydroxyl and sulfate radicals in the degradation process, and LC–MS experiments revealed the multi-step reaction process of TC degradation. This study provides a scientific basis for the efficient treatment of TC pollution in water.