Airy beams exhibit intriguing properties such as nonspreading, self‐bending, and self‐healing and have attracted considerable recent interest because of their many potential applications in photonics, such as to beam focusing, light‐sheet microscopy, and biomedical imaging. However, previous approaches to generate Airy beams using photonic structures have suffered from severe chromatic problems arising from strong frequency dispersion of the scatterers. Here, we design and fabricate a metasurface composed of silicon posts for the frequency range 0.4–0.8 THz in transmission mode, and we experimentally demonstrate achromatic Airy beams exhibiting autofocusing properties. We further show numerically that a generated achromatic Airy‐beam‐based metalens exhibits self‐healing properties that are immune to scattering by particles and that it also possesses a larger depth of focus than a traditional metalens. Our results pave the way to the realization of flat photonic devices for applications to noninvasive biomedical imaging and light‐sheet microscopy, and we provide a numerical demonstration of a device protocol.
In this paper, we propose a tunable dielectric metamaterial absorber in the terahertz (THz) range. The absorber is composed of a silicon pillar array embedded in a liquid crystal (LC) layer, which is sandwiched by two graphene electrodes. By way of varying the applied bias, the LC orientation can be continuously tuned. At a saturated bias, all LCs are vertically driven, and an absorption peak of 0.86 is achieved at 0.79 THz. When the bias is turned off, the same LCs are horizontally aligned, and the absorption peak degenerates into two smaller ones. A 47% modulation depth at 0.79 THz is obtained via numerical simulation with experimental feasibility considered. Such an active THz dielectric absorber may be utilized as part of various active THz apparatuses in THz imaging, sensing, switching, and filtering.
Liquid crystal (LC) is a promising candidate for terahertz (THz) devices. Recently, LC has been introduced to generate THz vortex beams. However, the efficiency is intensely dependent on the incident wavelength, and the transformed THz vortex beam is usually mixed with the residual component. Thus, a separating process is indispensable. Here, we introduce a gradient blazed phase, and propose a THz LC forked polarization grating that can simultaneously generate and separate pure THz vortices with opposite circular polarization. The specific LC gradient-rotation directors are implemented by a photoalignment technique. The generated THz vortex beams are characterized with a THz imaging system, verifying features of polarization controllability. This work may pave a practical road towards generating, separating and polarizing THz vortex beams, and may prompt applications in THz communications, sensing and imaging.
In this paper a novel optical vector network analyzer (OVNA) utilizing a distributed feedback semiconductor optical amplifier (DFB-SOA) is introduced. The proposed OVNA is implemented by converting the transmission response of the optical device under test (ODUT) into the electrical domain. The main principle of the OVNA is predicated on the optical carrier restoration facilitated by the wavelength-selective amplification attribute of the DFB-SOA. The implemented OVNA effectively determined the transmission spectrum of an optical filter possessing a passband of 9-GHz bandwidth, achieving a commendable resolution of 25 MHz in the measurement process. The dynamic range of the OVNA can be broadened by adjust the driven current under the DFB-SOA. Additionally, the detection range of our system can be expanded through the utilization of broadband optoelectronic devices. Furthermore, the OVNA possesses considerable potential for integration onto a single chip.