High altitude platform stations are attracting much attention as novel mobile communication platforms for ultra-wide coverage areas and disaster-resilient networks. Multi-cell configurations can increase communication capacity in a wide area. Conventional work optimizes the cell configuration for a multi-cell configuration based on a genetic algorithm (GA). This method identifies an optimal cell configuration in terms of spectral efficiency depending on the number of cells under a uniform user distribution. However, user distributions differ depending on location; thus, cell configuration optimization is also required for non-uniform user distributions. The problem is an increased number of parameters because each cell requires different antenna parameters for non-uniform user distribution compared to a uniform user distribution. This increases the difficulty of optimization, even when using a GA in some cases. Therefore, we propose a GA-based two-step cell optimization algorithm that comprises both search space reduction and antenna parameter optimization steps to address this problem. The proposed method employs the concept of co-evolution, i.e., a divide-and-conquer method. The proposed method divides multiple cells into several groups to reduce the number of optimized parameters and optimizes each group in order. In addition, the search space is reduced based on a marginal histogram obtained via optimization with a large step size. Simulation results demonstrate that this technique can reduce the number of combinations compared to the case without sub-area division. In addition, there are cases where the search space reduction further reduces the number of combinations without degrading the sum of the square root of throughput.
High-altitude platform stations (HAPSs) that provide direct communication services to smartphones on the ground are garnering significant attention as innovative mobile communication platforms suitable for ultrawide coverage areas. The deployment of a multi-cell configuration is essential for enhancing communication capacity over large geographical regions. However, designing and optimizing multi-cell configurations proves challenging due to the numerous antenna parameters involved, such as beamwidth and beam direction. HAPSs also hold promise in serving as reliable networks during disasters, as they can quickly restore coverage when terrestrial base stations (BSs) are in failure, allowing users to maintain connectivity via HAPSs using the same frequency band as terrestrial networks. Despite this advantage, HAPSs can potentially cause interference in terrestrial networks during such scenarios, necessitating careful considerations to avoid disrupting existing terrestrial networks. However, the optimization of cell configurations in the coexistence of HAPSs and terrestrial networks remains largely unexplored. To address this gap, this paper proposes a design scheme that leverages a genetic algorithm (GA) to optimize antenna parameters for each cell, thereby maximizing both user coverage and area coverage while ensuring coexistence with terrestrial networks. We optimize antenna parameters to increase user coverage and area coverage as a multi-objective optimization problem, resulting in a Pareto front that illustrates the trade-off choices. Additionally, the proposed method protects terrestrial networks by setting the initial beam direction of each cell to avoid interference with terrestrial BSs. Consequently, the GA can initiate optimization with candidate combinations that adhere to the interference constraints of terrestrial networks, thus expediting the optimization process and yielding improved coverage. Simulation results demonstrate that the proposed scheme outperforms conventional schemes which solely control beam direction, leading to superior coverage. While the results show trade-off between user coverage and area coverage, it is also clarified that considering both types of coverage show the potential to achieve significant improvements in both aspects simultaneously. Moreover, the results highlight the efficacy of the initial beam direction setting in enhancing coverage rates and significantly reducing the number of combinations required for the GA to converge.
In this paper, we propose a novel Deep Reinforcement Learning Evolution Algorithm (DRLEA) method to control the antenna parameters of the High-Altitude Platform Station (HAPS) mobile to reduce the number of low-throughput users. Considering the random movement of the HAPS caused by the winds, the throughput of the users might decrease. Therefore, we propose a method that can dynamically adjust the antenna parameters based on the throughput of the users in the coverage area to reduce the number of low-throughput users by improving the users’ throughput. Different from other model-based reinforcement learning methods, such as the Deep Network (DQN), the proposed method combines the Evolution Algorithm (EA) with Reinforcement Learning (RL) to avoid the sub-optimal solutions in each state. Moreover, we consider non-uniform user distribution scenarios, which are common in the real world, rather than ideal uniform user distribution scenarios. To evaluate the proposed method, we do the simulations under four different real user distribution scenarios and compare the proposed method with the conventional EA and RL methods. The simulation results show that the proposed method effectively reduces the number of low throughput users after the HAPS moves.
There is a growing interest in high-altitude platform stations (HAPSs) as potential telecommunication infrastructures in the stratosphere, providing direct communication services to ground-based smartphones. Enhanced coverage and capacity can be realized in HAPSs by adopting multicell configurations. To improve the communication quality, previous studies have investigated methods based on search algorithms, such as genetic algorithms (GAs), which dynamically optimize antenna parameters. However, these methods face hurdles in swiftly adapting to sudden distribution shifts from natural disasters or major events due to their high computational requirements. Moreover, they do not utilize the previous optimization results, which require calculations each time. This study introduces a novel optimization approach based on a neural network (NN) model that is trained on GA solutions. The simple model is easy to implement and allows for instantaneous adaptation to unexpected distribution changes. However, the NN faces the difficulty of capturing the dependencies among neighboring cells. To address the problem, a classifier chain (CC), which chains multiple classifiers to learn output relationships, is integrated into the NN. However, the performance of the CC depends on the output sequence. Therefore, we employ an ensemble approach to integrate the CCs with different sequences and select the best solution. The results of simulations based on distributions in Japan indicate that the proposed method achieves a total throughput whose cumulative distribution function (CDF) is close to that obtained by the GA solutions. In addition, the results show that the proposed method is more time-efficient than GA in terms of the total time required to optimize each user distribution.