Compound rotor / wing aircraft encounter significant aerodynamic interference during the transition flight phase, particularly when variable-radius mechanisms are introduced. This study investigates the aerodynamic interference of a compound structure — with a variable radius rotor and fixed wing — across the parameter space of rotor radius ratio, blade pitch, and forward flight speed, based on Navier–Stokes equations with the Multiple Reference Frame (MRF) method. The numerical method and grid size were validated by first using the Caradonna–Tung Rotor model. Then, a series of numerical simulations of the variable-radius rotor-wing compound structure was performed, and the thrusts generated by the rotor and affected by the wing, the lifts generated by the wing and subject to the rotor were analyzed. Results show that the wing mainly exerts a negative interference effect on the rotor. For the model in this study, the wing exerts a primarily negative effect on the rotor. This effect weakens as the rotor radius decreases and is more pronounced at low advance ratios. Conversely, the rotor primarily induces a downward load on the wing. This load constitutes approximately 25% or less of the isolated rotor’s thrust.
A collectible rotor hybrid aircraft (CRHA) represents a novel type of vertical takeoff and landing (VTOL) unmanned aircraft configuration, combining the typical rotor and transmission systems of helicopters with the wing and propulsion systems of fixed-wing aircraft. Its weight estimation and parameter design during the conceptual design stage cannot directly use existing rotorcraft or fixed-wing methods. This paper presents a rapid key design parameter sizing and maximum takeoff weight (MTOW) estimation approach tailored to CRHA, explicitly scoped to the 5–8-metric-ton (t) MTOW class. Component weight models are first formulated as explicit functions of key design parameters—including rotor disk loading, power loading, and wing loading. Segment-specific fuel weight fractions for VTOL and transition flight are then updated from power calculations, yielding a complete mission fuel model for this weight class. A hybrid optimization framework that minimizes MTOW is constructed by treating the key design parameters as design variables and combining a genetic algorithm (GA) with sequential quadratic programming (SQP). The empty-weight model, fuel-weight model, and optimization framework are validated against compound-helicopter, tilt-rotor, and twin-turboprop benchmarks, and parameter sensitivities are evaluated locally and globally. Results show prediction errors of roughly 10% for empty weight, fuel weight, and MTOW. Sensitivity analysis indicates that at the baseline design point, wing loading exerts the greatest influence on MTOW, followed by power loading and disk loading.
1 January 2025 in International Journal of Aerospace Engineering
Owing to the transition flight of rotor/wing hybrid vertical take‐off and landing (VTOL) aircraft, the fuel weight cannot be estimated from empirical data during the conceptual design phase. This paper proposes a method for estimating the minimal fuel weight fraction (FWF) through a strategy of trajectory optimization under a given flight profile. The typical flight profile of a disk–rotor hybrid aircraft is selected, and a dimensionless dynamic model is established for the flight mission segment by introducing the thrust–weight ratio and power–weight ratio. A trajectory optimization strategy is established with the minimum fuel consumption and flight time as the performance index, taking the dynamic model and waypoints on the flight profile as constraints. The Gauss pseudospectral method is used to solve for the minimum FWF of each mission segment, subsequently obtaining the FWF of the whole flight profile, and results are compared with those obtained from the conventional empirical Breguet method, confirming the validity of the approach proposed here. The optimization results demonstrate that the method proposed in this paper enables the comprehensive calculation of the FWF for the entire flight profile without considering the take‐off weight. Furthermore, the impacts of the general and performance‐related parameters associated with the flight profile on the FWF can be observed.