Arrhythmia is the main cause of sudden cardiac death, and ECG signal analysis is a common method for the noninvasive diagnosis of arrhythmia. In this paper, we propose an arrhythmia classification model based on the combination of a channel attention mechanism (SE module), convolutional neural network (CNN), and long short-term memory neural network (LSTM). The data of this model use the MIT-BIH arrhythmia database, and after noise reduction of raw ECG data by the EEMD denoising algorithm, a CNN-LSTM is used to learn features from the data, and the fusion channel attention mechanism is used to adjust the weight of the feature map. The CNN-LSTM-SE model is compared with the LSTM, CNN-LSTM, and LSTM-attention models, and the models are evaluated using Precision, Recall, and F1-Score. The classification performance of the tested CNN-LSTM-SE classification prediction model is better, with a classification accuracy of 98.5%, a classification precision rate of more than 97% for each label, a recall rate of more than 98%, and an F1-score of more than 0.98. It meets the requirements of arrhythmia classification prediction and has a certain practical value.
The lidar is susceptible to the dark current of the detector and the background light during the measuring process, which results in a significant amount of noise in the lidar return signal. To reduce noise, a novel denoising method based on the convolutional autoencoding deep-learning neural network is proposed. After the convolutional neural network was constructed to learn the deep features of lidar signal, the signal details were reconstructed by decoding part to obtain the denoised signal. To verify the feasibility of the proposed method, both the simulated signals and the actually measured signals by Mie-scattering lidar were denoised. Some comparisons with the wavelet threshold denoising method and the variational modal decomposition denoising method were performed. The results show the denoising effect of the proposed method was significantly better than the other two methods. The proposed method can eliminate complex noise in the lidar signal while retaining the complete details of the signal.
Atmospheric lidar is susceptible to the influence of light attenuation, sky background light, and detector dark currents during the detection process. This results in a large amount of noise in the lidar return signal. To reduce noise and extract a useful signal, a novel denoising method combined with variational modal decomposition (VMD), the sparrow search algorithm (SSA) and singular value decomposition (SVD) is proposed. The SSA is used to optimize the number of decomposition layers K and the quadratic penalty factor α values of the VMD algorithm. Some intrinsic mode function (IMF) components obtained from the VMD-SSA decomposition are grouped and reconstructed according to the interrelationship number selection criterion. Then, the reconstructed signal is further denoised by combining the strong noise-reduction ability of SVD to obtain a clean lidar return signal. To verify the effectiveness of the VMD-SSA-SVD method, the method is compared and analysed with wavelet packet decomposition, empirical modal decomposition (EMD), ensemble empirical modal decomposition (EEMD), and adaptive noise-complete ensemble empirical modal decomposition (CEEMD), and its noise-reduction effect is considerably improved over that of the other four methods. The method can eliminate the complex noise in the lidar return signal while retaining all the details of the signal. The signal is not distorted, the waveform is smoother, and far-field noise interference can be suppressed. The denoised signal is closer to the real signal with higher accuracy, which shows the feasibility and the practicality of the proposed method.
ECG signal processing is an important basis for the prevention and diagnosis of cardiovascular diseases; however, the signal is susceptible to noise interference mixed with equipment, environmental influences, and transmission processes. In this paper, an efficient denoising method based on the variational modal decomposition (VMD) algorithm combined with and optimized by the sparrow search algorithm (SSA) and singular value decomposition (SVD) algorithm, named VMD–SSA–SVD, is proposed for the first time and applied to the noise reduction of ECG signals. SSA is used to find the optimal combination of parameters of VMD [,], VMD–SSA decomposes the signal to obtain finite modal components, and the components containing baseline drift are eliminated by the mean value criterion. Then, the effective modalities are obtained in the remaining components using the mutual relation number method, and each effective modal is processed by SVD noise reduction and reconstructed separately to finally obtain a clean ECG signal. In order to verify the effectiveness, the methods proposed are compared and analyzed with wavelet packet decomposition, empirical mode decomposition (EMD), ensemble empirical mode decomposition (EEMD), and the complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) algorithm. The results show that the noise reduction effect of the VMD–SSA–SVD algorithm proposed is the most significant, and that it can suppress the noise and remove the baseline drift interference at the same time, and effectively retain the morphological characteristics of the ECG signals.
Turbulence can cause effects such as light intensity fluctuations and phase fluctuations when a laser is transmitted in the atmosphere, which has serious impacts on a number of optical engineering application effects and on climate improvement. Therefore, accurately obtaining real-time turbulence intensity information using lidar-active remote sensing technology is of great significance. In this paper, based on residual turbulent scintillation theory, a Mie-scattering lidar method was developed to detect atmospheric turbulence intensity. By extracting light intensity fluctuation information from a Mie-scattering lidar return signal, the atmospheric refractive index structure constant, , representing the atmospheric turbulence intensity, could be obtained. Specifically, the scintillation effect on the detection path was analyzed, and the probability density distribution of the light intensity of the Mie-scattering lidar return signal was studied. It was verified that the probability density of logarithmic light intensity basically follows a normal distribution under weak fluctuation conditions. The profile based on Kolmogorov turbulence theory was retrieved using a layered, iterative method through the scintillation index. The method for detecting Kolmogorov turbulence intensity was applied to the detection of the non-Kolmogorov turbulence intensity. Through detection using the scintillation index, the corresponding profile could be calculated. The detection of the and profiles were compared with the Hufnagel–Valley (HV) night model in the Yinchuan area. The results show that the detection results are consistent with the overall change trend of the model. In general, it is feasible to detect a non-Kolmogorov turbulence profile using Mie-scattering lidar.
Particle size distribution is one of the important microphysical parameters to characterize the aerosol properties. The aerosol optical depth is used as the function of wavelength to study the particle size distribution of whole atmospheric column. However, the inversion equation of the particle size distribution from the aerosol optical depth belongs to the Fredholm integral equation of the first kind, which is usually ill-conditioned. To overcome this drawback, the integral equation is first discretized directly by using the complex trapezoid formula. Then, the corresponding parameters are selected by the L curve method. Finally the truncated singular value decomposition regularization method is employed to regularize the discrete equation and retrieve the particle size distribution. To verify the feasibility of the algorithm, the aerosol optical depths taken by a sun photometer CE318 over Yinchuan area in four seasons, as well as hazy, sunny, floating dusty and blowing dusty days, were used to retrieve the particle size distribution. In order to verify the effect of truncated singular value decomposition algorithm, the Tikhonov regularization algorithm was also adopted to retrieve the aerosol PSD. By comparing the errors of the two regularizations, the truncated singular value decomposition regularization algorithm has a better retrieval effect. Moreover, to understand intuitively the sources of aerosol particles, the backward trajectory was used to track the source. The experiment results show that the truncated singular value decomposition regularization method is an effective method to retrieve the particle size distribution from aerosol optical depth.