The advancement of PVT technology in the contemporary era is experiencing an upward trend. This phenomenon can be attributed to the growing societal demand for energy, particularly renewable energy derived from solar sources. The present study investigates the rectangular configuration of a water-based heat absorber within a photovoltaic-thermal (PVT) system. The rectangular model PVT system was simulated using nine different mass flow rate of water variations within the rectangular model channel. The dataset has nine mass flow rate of water variants ranging from 0.001 kg/s to 0.009 kg/s, as well as six solar radiation variations: 500 W/m2, 600 W/m2, 700 W/m2, 800 W/m2, 900 W/m2, and 1000 W/m2. The maximum average outlet temperature achieved under 1000 W/m2 solar radiation is 50.53%, given a 0.001 kg/s fluid mass flow rate. The maximum average photovoltaic (PV) efficiency is 11.93% when exposed to 500 W/m2 solar radiation intensity. The maximum average photovoltaic-thermal (PVT) efficiency is 76.23% when exposed to 500 W/m2 solar radiation intensity. Therefore, utilizing rectangular collectors in water-based photovoltaic-thermal systems potentially substantially enhanced the average thermal efficiency and overall PVT efficiency. Consequently, it is advisable to consider incorporating rectangular collectors in the future improvements of PVT technology.
22 February 2024 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Renewable energy sources are becoming increasingly crucial in the global energy industry and are acknowledged as a significant substitute for fossil fuels. Oil palm fronds are a type of biomass fuel that can be utilized as a substitute for fossil fuels in the combustion process of boilers. Co-firing (HT-FRD) is a beneficial technology for reducing exhaust gas emissions generated by coal-burning power stations. By utilizing computational fluid dynamics (CFD), this study has modeled and evaluated co-firing palm frond residue (HT-FRD) with hydrothermal treatment into a 315 MWe boiler. In the simulation, six different HT-FRD co-firing ratios, 0%, 5%, 15%, 25%, 35%, and 50%, were used to demonstrate the differences in combustion characteristics and emissions in the combustion chamber. The data indicate that HT-FRD co-firing can enhance temperature distribution, velocity, and unburned particles. All in all, co-firing conditions with 5–15% HT-FRD ratios appear to have the most favorable combustion temperature, velocity, and exhaust gas characteristics.