Composite materials are used in many advanced engineering applications because of high specific strength and stiffness. Their complex damage mechanisms and failure modes, however, are still not well-understood, thus challenging the application safety. Ultrasonic guided waves are promising structural health monitoring tools used to determine the operational safety of composite materials. In this article, a fully coupled numerical simulation model is used to study wave propagation and dispersion in composites under varying sensor locations, propagating orientations, excitation frequencies, and damage locations. The model is based on the local interaction simulation approaches/sharp interface model wherein output sensor signals are processed using the matching pursuit decomposition algorithm to study the signal features in the time–frequency domain. The changes in signals due to varying damage locations with respect to the through-thickness direction are studied under anti-symmetrical and symmetrical excitation scenarios. The results show that the signal from symmetric excitation is more sensitive to the damage location, while the signal from anti-symmetric excitation is less dispersive. It indicates that comprising effective feature extraction technique with the accurate physics-based numerical simulation model can be implemented to develop robust structural health monitoring framework for composites.
24 September 2018 in Annual Conference of the PHM Society
This paper presents a robust real-time aircraft health monitoring framework using a machine learning based approach, specifically the multivariate Gaussian mixture model (mGMM), for the detection of in-air operational anomalies of an aircraft system. Sensor fusion and noise filtering algorithms have also been adopted to reduce dimensionality of the feature space while avoiding the elimination of useful information from the original flight data. Random noise in each feature, induced by the aircraft sensors and data acquisition system, is filtered out using a weighted averaging window while maintaining inherent variances. The filtered dataset is then fused according to the underlying physics of each sensed feature to reduce redundant features and subsequently trained using the mGMM. The methodology allows monitoring the behavior of each feature as well as correlations between features, significantly improving detection sensitivity. The high computational efficiency of this approach permits real-time monitoring of an aircraft system.
This paper presents the development of a nondestructive evaluation method for delamination detection in integrated circuit (IC) packages. The developed method allows for quantitative detection of sealant delamination between integrated heat sink (IHS) and substrate, which is considered a potential failure mechanism in IC packages. The proposed method is expected to overcome the destructive nature of most existing techniques, while maintaining low cost of development. The reported development consists of the following processes: First, flash thermographic analysis is investigated and shown to be incapable of detecting a realistic sealant delamination. Then, ultrasonic guided waves (UGWs) are used as the chosen interrogation method due to their sensitivity to small-size damage and structural thickness variations. The complexity of the received ultrasonic signals caused by the geometric heterogeneity is resolved using a time–frequency signal processing technique. The extracted ultrasonic information, including time-of-arrival (TOA) and amplitude of wave modes received from different sensing paths under multiple excitation frequencies, is then used to construct a feature space. A multivariate Gaussian model is implemented as an information fusion and delamination detection tool, which investigates the distribution of feature space including correlations between features. Results from the developed model are compared with two existing evaluation methods, including pullout force measurement and a delamination metric. The developed method is seen to possess a similar level of accuracy with a nondestructive nature.
22 September 2019 in Annual Conference of the PHM Society
A real-time monitoring framework is developed to detect operational anomalies in aircraft engine performance. A historical flight dataset recorded from commercial aircraft is utilized to perform the proposed method. Sampling frequency synchronization and denoise are performed on the flight dataset using signal processing techniques. A robust detection algorithm using the deep neural network is developed to capture flight performance anomalies that show significant off-nominal behavior in engine related and flight dynamic features. The accuracy and efficiency of the proposed monitoring method are validated through a demonstration of anomaly detection in the aircraft engine system associated with dynamic flight behavior.