Background/Objectives: Radiography is an essential and low-cost diagnostic method in pulmonary medicine that is used for the early detection and monitoring of lung diseases. An adequate and consistent image quality (IQ) is crucial to ensure accurate diagnosis and effective patient management. This pilot study evaluates the feasibility and effectiveness of the International Atomic Energy Agency (IAEA)’s remote and automated quality control (QC) methodology, which has been tested in multiple imaging centers. Methods: The data, collected between April and December 2022, included 47 longitudinal data sets from 22 digital radiographic units. Participants submitted metadata on the radiography setup, exposure parameters, and imaging modes. The database comprised 968 exposures, each representing multiple image quality parameters and metadata of image acquisition parameters. Python scripts were developed to collate, analyze, and visualize image quality data. Results: The pilot survey identified several critical issues affecting the future implementation of the IAEA method, as follows: (1) difficulty in accessing raw images due to manufacturer restrictions, (2) variability in IQ parameters even among identical X-ray systems and image acquisitions, (3) inconsistencies in phantom construction affecting IQ values, (4) vendor-dependent DICOM tag reporting, and (5) large variability in SNR values compared to other IQ metrics, making SNR less reliable for image quality assessment. Conclusions: Cross-comparisons among radiography systems must be taken with cautious because of the dependence on phantom construction and acquisition mode variations. Awareness of these factors will generate reliable and standardized quality control programs, which are crucial for accurate and fair evaluations, especially in high-frequency chest imaging.
Dual-energy (DE) for quantitative material discrimination has emerged as a promising application of microCT to increase contrast discrimination in preclinical studies. Here we present a protocol designed to optimize DE image subtraction for contrast enhanced studies in rodents, employing iodine-based contrast medium (CM). Our investigation used an Albira ARS commercial unit, not specifically designed for quantitative CT tasks. DE subtraction was divided into stages that were independently analyzed: acquisition, volume reconstruction, image registration and image weighting. The DE radiological techniques (low- and high- energy) had been previously optimized to enhance the visualization of iodine-based CM. An independent reconstruction was needed to guarantee linearity between iodine intensity and its concentration for high energy acquisition; it also reduced structured noise occasionally produced by the microCT reconstruction software over uniform regions and improved bone visualization. Image registration was optimized combining an affine transformation with a non-linear transformation determined with the Free-Form Deformation algorithm. Two subtraction weight factors were determined: one that maximized the contrast-to-noise ratio (CNR) of iodine mixed with soft-tissue-equivalent resin and another that minimized CNR between bone-like rods and soft-tissue-equivalent material. A pilot test of the optimized protocol was performed on a rat injected with a continuous flow of CM.
Desde el comienzo de la pandemia de Covid-19 los servicios de prevención de cáncer de mama han sido aplazados gravemente. Esta acción provocó la reducción en el número acumulado de mastografías de detección a nivel mundial e incrementó las disparidades en salud, sobre todo entre las mujeres vulnerables. Si bien la evidencia que respalda las estrategias para rescatar el tamizaje con mastografía en la fase de resolución de la pandemia no es suficiente, hay algunas consideraciones pragmáticas que pueden guiar su recuperación y garantizar su continuidad. Una de estas estrategias es prever los retrasos en el tamizaje y abordarlos a través de programas seguros que se alineen con la situación epidemiológica actual. Las acciones planteadas en el presente ensayo están en consonancia con las iniciativas internacionales de garantizar la continuidad de los programas de tamizaje de cáncer de mama en atención a que el cuidado de las mujeres sea una acción prioritaria, continua y permanente.
Material decomposition methods can be used to quantify volumetric breast density based on dual-energy mammography images; this is of current interest due to the known association between breast density and breast cancer risk. Contrast-enhancement mammography phantoms have been used to calibrate inverse mapping techniques to obtain glandular density and iodine concentration maps. To apply the method, precise calibration is required. We have investigated the effect of cladding material (1 cm wide PMMA bars) around the phantom to make certain that all the phantom elements are properly exposed to primary and scattered radiation. The calibration accuracy was quantified by the maximum absolute deviation and the root mean square error (RMSE) of the fit to calibration data and evaluated for linear and quadratic models, with and without cladding. Results showed that the addition of cladding improved the fit reducing RMSE by 30% and 38% for glandular tissue and iodine quantification, respectively. The best results were obtained when using a quadratic calibration function and the addition of cladding.
Despite the great advances in medical imaging, radiography and digital mammography equipment are still vitally important techniques. To ensure correct operation, it is necessary to have quality control (QC) that guarantees all the elements remain invariant over time. In this work, the methodology proposed by the International Atomic Energy Agency (IAEA) was evaluated, which consists of the manufacture of two phantoms easily and economically, one for radiography and one for mammography. We assessed the repeatability of image quality metrics considering four sources of variation: the homogeneity of the metal inserts, the position of the metal inserts, the X-ray tube, and the use of the Automated Tool for Image Analysis software (ATIA). This was carried out in six systems: four digital mammographsand two digital radiography systems from the Mexican National Cancer Institute. With this, it was possible to establish reference and tolerance levels for each unit.