In order to ensure the vibration safety of rotor systems in the next generation of aero-engines and reduce the impact of misalignment faults, the effect of support misalignment on the vibration characteristics of rotor systems under ultra-high operating speeds is investigated in this paper. Firstly, an analytical excitation model of the rotor systems under ultra-high operating speeds is established, considering the impact of the support misalignment. Then, based on the model of the misaligned combined support system, the dynamic model of the flexible discontinuous rotor support system with the support misalignment is presented. Subsequently, based on the established model, the effects of support parameters and support misalignment amounts on the vibration characteristics of the rotor support system are analyzed. Finally, experimental validation of the research findings is conducted. The research result shows that the support misalignment increases the vibration response of the rotor, reduces the vibration reduction efficiency of the combined support system, and consequently decreases the vibration safety of the rotor support system.
Blade off that occurs during operation will generate a sudden imbalance excitation and make the rotor become inertially asymmetric, which leads to large instantaneous impact load and induces more complex rotor dynamic phenomena. In order to study the transient dynamic characteristics for complex rotors suffering from blade off, a mathematical model for solving the response of the gas generator rotor in the aero-turboshaft engine is established based on the FE method and DOF condensation, in which the complex structural characteristics, transient impact load, and inertia asymmetry of the rotor are considered. The complex impeller structure is modeled by piecewise linear fitting with cylindrical beam elements and tapered beam elements. Without loss of generality, the modeling method suitable for complex rotors is verified through a general complex test rotor with modal experiments. Based on this, the responses are solved for carrying out parametric studies and an understanding of the transient dynamic characteristics of the rotor under the extreme working conditions of blade off. The results show that the blade off has a great impact effect on the time-domain waveform, frequency components, and rotor orbits. At the instantaneous stage after blade off, the complex motion is composed of synchronous motion and some lower-order natural modes excited by blade off. Although the transient responses with blade off at different rotational speeds have similar time-varying characteristics, the impact factor is sensitive to the rotating speed. Most important is that the parameter of the blade off location will not only have a significant effect on the impact factor, but also on the frequency spectrum. These dynamic characteristics as well as impact effect provide certain guidance for the fault recognition and dynamic analysis to these complex rotors suffering blade off.
To ensure the vibration safety of rotor support systems in modern aeroengines, this study develops a dynamic model of the aeroengine gas generator rotor system and analyzes its complex unbalance response characteristics. Subsequently, it investigates vibration reduction strategies based on these response patterns. This study begins by developing individual dynamic models for the disk–blade system, the circular arc end-teeth connection structure and the squeeze film damper (SFD) support system. These models are then integrated using the differential quadrature finite element method (DQFEM) to create a comprehensive dynamic model of the gas generator rotor system. The unbalance response characteristics of the rotor system are calculated and analyzed, revealing the impact of the unbalance mass distribution and the combined support system characteristics on the unbalance response of the rotor system. Drawing on the obtained unbalance response patterns, the vibration reduction procedures for the rotor support system are explored and experimentally verified. The results demonstrate that the vibration response of the modern aeroengine rotor support system can be reduced by adjusting the unbalance mass distribution, decreasing the bearing stiffness and increasing the bearing damping, thereby enhancing the vibration safety of the rotor system. This study introduces a novel integration of DQFEM with detailed component-level modeling of circular arc end-teeth connections, disk–blade interactions and SFD dynamics. This approach uniquely captures the coupled effects of unbalance distribution and support system characteristics, offering a robust framework for enhancing vibration safety in aeroengine rotor systems. The methodology provides both theoretical insights and practical guidelines for optimizing rotor dynamic performance under unbalance-induced excitations.
24 October 2024 in Engineering Science and Technology, an International Journal
The curvic coupling, as one of the common connecting structures for gas turbine combined rotors, is more susceptible to various dynamic and static loads at extreme operating conditions. But, traditional combined rotor models tend to neglect the influence of the connection structure, especially failing to consider the contribution of the curvic coupling interfaces. To address this problem, this paper establishes a solid geometric model of the combined rotor with curvic couplings considering the rough three-dimensional interfaces. The effectiveness of the proposed model method is indirectly verified through the compression tests and modal tests. Subsequently, combined with finite element calculations, the mechanical properties of the rotor with curvic couplings considering the rough interface are analyzed under static and dynamic load conditions. The results indicate that the roughness of the interface significantly affects the deformation of the contact surface under static load, but its impact on the overall deformation of the rotor is relatively insignificant. The dynamic stress at the interface exhibits periodic variations at the resonance speed. At the maximum operating speed, the dynamic stress is influenced by the magnitude of imbalance. The aforementioned methods and conclusions provide a reference for the design research and engineering application of combined rotors.
Aiming at the complex mechanical characteristics of the curvic coupling in the aero-engine rotor under operation condition, the contact stiffness model of the curvic coupling under the bending vibration is proposed to study the law of stiffness loss of the curvic coupling and the dynamic characteristics of the rotor with the curvic coupling under the bending vibration. Based on the Hertz contact theory and the elastic-plastic contact theory, an analytical model for the contact stiffness of the three-dimensional curvic coupling is established considering the complex geometric characteristics of the curvic coupling. And the law of stiffness loss of the curvic coupling under the bending vibration is studied. Then, a finite element model of the rotor system is proposed and the dynamic characteristics of the rotor system is analyzed. The results are tested and verified. The results show that the stiffness loss of the curvic coupling under the bending vibration is increased and the critical speed of the rotor is decreased caused by the increased stiffness loss. The contact stiffness model and research conclusions proposed in this paper provide an important theoretical basis for the design and dynamic characteristics analysis of modern aero-engine rotor systems.