Effect of nanoparticles (NPs) loaded methylene blue (MB) mediated photodynamic therapy (PDT) on caries-affected dentin (CAD) against S.mutans, smear layer (SL) elimination, and shear bond strength (SBS) of single bottle 7th generation adhesive. Sixty human molars with carious lesions were selected. Samples were randomly allocated into four groups, based on the disinfection regime (n = 11) Group 1-(CHX), Group 2-(MB-PDT), Group 3-(MB-CNPs-PDT), and Group 4-(MB-TiO2NPs-PDT). Following disinfection S.mutans' survival rate was assessed using the pour plate method. Five specimens from each disinfection group were subjected to SL removal assessment using a scanning electron microscope (SEM). Bonding of 7th generation adhesive and composite restoration was performed on ten samples from each group. Artificial aging of the bonded samples was performed followed by SBS and failure mode analysis using a universal testing machine and stereomicroscope respectively. One-way analysis of variance (ANOVA) and Tukey post hoc test were used to analyze the data. Group 3 (MB-CNPs-PDT) treated CAD surface unveiled the lowest survival rate (0.12 ± 0.02 CFU/mL) of tested bacteria, maximum SL removal (1.21 ± 0.35), and highest bond strength (13.42 ± 1.05). However, Group 1 (CHX) treated specimens displayed the highest survival rate (0.53 ± 0.11 CFU/mL) with the lowest SL removal (2.24 ± 0.30) and SBS (8.88 ± 0.73 MPa). MB-CNPs-PDT appears to be a suitable alternative to CHX for CAD disinfection as it displayed better antibacterial efficacy, SL removal, and SBS with 7th generation single bottle adhesive.
The objectives of this study were to investigate the pH of common beverages and to evaluate the effects of common acidic beverages on the surface hardness and weight loss of human tooth specimens. A total of 106 beverages were conveniently purchased from supermarkets in Karachi, Pakistan. Prior to evaluation, beverages were refrigerated or stored at room temperature in accordance with the manufacturers’ recommendations. Beverages were categorized into six groups: ‘Sports and Energy drinks’, ‘Water’, ‘Fruit Juices and Drinks’, ‘Sodas’, ‘Milk and Flavored Milk’ and ‘Teas and Coffee’. Using a pH meter, the pH of each beverage was measured in triplicate at room temperature. In addition, the influence of five highly acidic beverages on the weight loss and surface hardness of human tooth specimens was evaluated using gravimetric analysis and the Vickers hardness tester, respectively. ‘Sports and Energy drinks’, ‘Fruits Juices and Drinks’ and ‘Sodas’ were the most acidic beverage categories, with a pH range of 3.00–5.00. A total of 33% of beverages tested in this study were highly acidic (pH less than 4.00), 29% of beverages were moderately acidic (pH 4.00–4.99) and 31% were mildly acidic (pH 5.00–6.99). Significant weight loss was observed in all immersed specimens compared to control counterparts (p < 0.05). Similarly, for surface hardness, five highly acidic beverages (Red Bull, Pepsi, Apple Cidra, Tang Mosambi and Tang Orange) significantly decreased the surface hardness of specimens (p < 0.05). The pH levels of commonly available beverages in Pakistan are highly acidic, which may encourage loss of minerals from teeth; hence, affecting their surface hardness.
Glass ionomer cements (GICs) have been clinically attractive dental restorative materials for many years and are widely used as luting, lining, and restorative materials. However, these materials still have limitations in terms of weak physio-mechanical properties. The aim of the study was to evaluate the effect of zirconium oxide nanoparticles (nano-ZrO2 particles) on the physical and mechanical properties of two commercially available GICs. Four groups were prepared for each material: the control group (without nanoparticles) and three groups modified by the incorporation of nanoparticles at 2, 5, and 7 weight% (wt%). Firstly, the morphology and size of the nanoparticles were evaluated via scanning electron microscopy (SEM) and X-ray diffraction (XRD). Secondly, flexural strength, flexural modulus, Vickers hardness, water sorption, and solubility were evaluated. The main effect plots revealed that the addition of nano-ZrO2 particles enhances flexural strength, flexural modulus, and water sorption of GICs at a 7 wt% concentration and Vickers hardness at a 2 wt% concentration. The SEM analysis clearly shows that the cracks became narrower with the addition of nano-ZrO2 particles, whereas these cracks were completely closed at 7% nano-ZrO2 particles. The findings of the study appear promising, and it is anticipated that the optimization of nano-ZrO2 particles may aid the development of improved materials for load-bearing restorations.
Dental caries is a frequently encountered bacterial oral disease worldwide. Resin-based dental composites (RDCs) are often utilised for restoring dental ca