In this work the nature of the substitution process in the electrochemical deposition of different 4-substituted benzene layers on Au and the influence of the solvent were studied. We monitored the deposition from the corresponding isolated salt diazonium salts and via the “in solution diazotation” process where the diazonium salt is created just before the deposition process by means of amine and nitrite. Infrared spectroscopic ellipsometry measurements proved the presence of the various substituted benzene groups on the surfaces. Quantitative studies using electrochemical quartz crystal microbalance technique showed a decrease in the deposited organic layer thickness and the faradaic efficiency of the electrochemical process with the size of the 4-substituent. As consequence nature of the substituent in the 4-position was the dominating factor for thickness of the deposited benzene layer and the faradaic efficiency. Additionally, there was also a strong increase in the thickness of the deposited benzene layer by changing the solvent from aqueous sulphuric acid to acetonitrile pointing to a stabilization of the radical intermediates during reduction of the diazonium salt by acetonitrile. This in turn led to faradaic efficiencies of about 80%–90% for the grafting process in acetonitrile and only 15% in the aqueous acidic solution.
25 April 2018 in Journal of Polymer Science Part A: Polymer Chemistry
Electron overcharge causes rapid luminescence quenching in the quantum dot (QD) emission layer in QD light–emitting diodes (QD–LEDs), resulting in low device performance. In this paper we describe the application of different aromatic thiol ligands and their influence on device performance as well as their behavior in combination with an electron blocking material (EBM). The three different ligands, 1–octanethiol (OcSH), thiophenol (TP), and phenylbutan–1–thiol (PBSH), were introduced on to InP/ZnSe/ZnS QDs referred to as QD–OcSH, QD–TP, and QD–PBSH. PBSH is in particular applied as a ligand to improve QD solubility and to enhance the charge transport properties synergistically with EBM probably via π–π interaction. We synthesized poly-[N,N-bis[4-(carbazolyl)phenyl]-4-vinylaniline] (PBCTA) and utilized it as an EBM to alleviate excess electrons in the active layer in QD–LEDs. The comparison of the three QD systems in an inverted device structure without the application of PBCTA as an EBM shows the highest efficiency for QD–PBSH. Moreover, when PBCTA is introduced as an EBM in the active layer in combination with QD–PBSH in a conventional device structure, the current efficiency shows a twofold increase compared to the reference device without EBM. These results strongly confirm the role of PBCTA as an EBM that effectively alleviates excess electrons in the active layer, leading to higher device efficiency.
9 September 2004 in Macromolecular Chemistry and Physics