Ercan Özgan

Prof. Dr. Ercan Özgan


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
EÖErcan Özgan
Ercan Özgan
The stability of asphalt concrete under the effects of freezing and thawing was studied experimentally, and the experimental test results were modelled using fuzzy logic and statistical methods. The stability was investigated experimentally using the Marshall and ultrasound methods. Asphalt core samples 10 cm in diameter were alternately frozen (–20°C for 16 hr) and thawed (16°C for 8 hr) for 5, 10, 15, 20, 25, and 30 cycles to simulate daily winter conditions. The stability of asphalt concrete at the laboratory environment temperature of 17°C was used as a reference. The results showed that the stability of asphalt core samples exposed to freezing and thawing increased, and this increase varied between 22.7% and 19.2% for 5- and 30-day cycles, respectively. By using Fuzzy Logic and statistical methods, prediction models were constituted based on freezing-thawing cycle, bitumen ratio, saturated unit volume weight, volume of voids, air dry unit volume weight to predict the Stability of asphalt concrete which could not be determined with experimental. The experimental results, the fuzzy logic model, and the statistical results showed good correlations. For the stability of asphalt core samples, the correlation coefficient was R2 = 0.88 for the fuzzy logic model and R2 = 1.0 for the statistical method. Based on the results of this study, it is clear that both the fuzzy logic and statistical methods can be used to model the stability of asphalt concrete under various freezing and thawing conditions.

9 May 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AGAyşe Bengü Sünbül Güner
Ayşe Bengü Sünbül Güner
EÖErcan Özgan
Ercan Özgan
Understanding the geotechnical behavior of soils is fundamental for the safe design and performance of engineering structures. This study investigates the bearing capacity and settlement behavior of gravel soils using extensive field and laboratory data collected from 27 boreholes in Düzce, northwest Türkiye. Key soil parameters, including excavation depth, groundwater levels, unit weight, water content, particle size distribution, internal friction angles, and cohesion coefficients, were analyzed. Correlation analysis revealed a significant relationship between bearing capacity and the No. 200 sieve value, while relationships with other parameters were less pronounced. Predictive models for bearing capacity and settlement were developed using multiple linear regression, quadratic, and cubic models. The cubic model demonstrated the highest accuracy, predicting bearing capacity with an R2 of 0.79 and settlement with an R2 of 0.904. These results underscore the potential of advanced statistical models to reliably estimate geotechnical properties based on measurable soil parameters. The findings emphasize the importance of combining field and laboratory analyses with robust statistical approaches to accurately predict soil behavior. This methodology provides a foundation for improving geotechnical design practices and may be extended to other soil types and regions, thereby enhancing the reliability and efficiency of soil parameter estimation for engineering applications.

1 September 2018 in Journal of Asian Architecture and Building Engineering
Verified
Journal Article
Open access
PDF file
MUMetin M. Uzunoğlu
Metin M. Uzunoğlu
EÖErcan Özgan
Ercan Özgan
TKTuncay kap
Tuncay kap
Japan's largest platform for academic e-journals: J-STAGE is a full text database for reviewed academic papers published by Japanese societies

12 February 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TKTuncay kap
Tuncay kap
EÖErcan Özgan
Ercan Özgan
This study investigates seismic loads in single-story masonry buildings with walls of varying heights and thicknesses, and determines optimum wall dimensions for seismic resistance using the Taguchi method. For this purpose, 25 (5 × 5 = 25) different masonry building models were created with thicknesses of 16, 20, 24, 28, and 32 cm and heights of 260, 280, 300, 320, and 340 cm. The building models were analysed using a software package in accordance with the 2018 Turkish Building Earthquake Code (2018 TBEC). C-30 concrete and S-420 steel were used in the designed building models. A 12 cm thick reinforced concrete slab was placed on top of the masonry walls. A live load of 0.2 t/m2 was designed on the slab, and the mortar strength of the brick wall was taken as 30 MPa. When a building model with a height of 260 cm and a thickness of 16 cm was used as a reference, it was observed that the seismic resistance of other building models increased by approximately 72%, while shear forces increased by approximately 89% in the “x” direction and approximately 95% in the “y” direction. Furthermore, it was observed that as the ratio of wall height to wall thickness increased, the seismic resistance of the building models decreased. The seismic resistance of 25 different building models was analysed using the Taguchi method, depending on wall thickness and wall height. The analysis revealed that the building model with walls 24 cm thick and 340 cm high was the most resistant to shear forces, while the building model with walls 32 cm thick and 340 cm high provided the best resistance to seismic loads.

28 February 2026 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AGAyşe Bengü Sünbül Güner
Ayşe Bengü Sünbül Güner
EÖErcan Özgan
Ercan Özgan
In geotechnical foundation engineering, the bearing capacity and settlement behaviour of clay soils are key parameters governing foundation performance. Insufficient bearing capacity and excessive settlements limit economical foundation design and may lead to increased structural deformations. This study investigates the physical and mechanical properties of low-plasticity (CL) and high-plasticity (CH) clay soils obtained from boreholes drilled in Düzce Province, Türkiye, where bearing capacity, settlement, and relevant soil parameters were determined through field and laboratory testing and subsequently evaluated using statistical analyses. The calculated bearing capacity values ranged from 192 to 556 kPa, while settlement values varied between 0.88 cm and 5.83 cm. The corresponding maximum-to-minimum ratios were approximately 2.89 for bearing capacity and 6.62 for settlement. The effects of unit weight, water content, particle size distribution, groundwater level, internal friction angle, and cohesion on the bearing capacity and settlement behaviour of the examined clay soils were systematically assessed. The results indicate that unit weight is the most influential parameter for increasing bearing capacity and reducing settlement in CL-type soils, whereas the cohesion coefficient is the dominant parameter in CH-type soils. The results indicate that variations in shear strength and moisture-related parameters exert a significant influence on foundation performance. The findings provide quantitative insight into the relative impact of key soil parameters and offer practical implications for the design of building foundations in clayey soils under similar geological and geotechnical conditions. From a practical perspective, the findings support foundation design, especially in earthquake-prone areas, by accounting for soil bearing capacity and ensuring that settlements remain within permissible limits to maintain long-term structural performance.