A revalorised Burzyński’s hypothesis was suggested for determination of effort of construction elements in thermally variable load conditions. Using the suggested hypothesis, surfaces of the beginning of plasticity for the heat resistant St12T steel were determined. Two numerical simulations of thermo-mechanical loads of the turbine vane made of St12T steel were performed. The result of analyses was determination of the effort states of a vane acc. to Huber-Mises- Hencky’s hypotheis and according to the suggested revalorised Burzyński’s hypothesis.
1 December 2021 in Case Studies in Thermal Engineering
The paper analyses the possibility of using analytical methods of notch stress-strain correction in low-cycle fatigue life predictions of steam turbine rotors operating under non-isothermal conditions. The assessment was performed by comparing strain amplitudes calculated using the Neuber and Glinka-Molski methods and those predicted by the finite element analysis (FEA) employing elastic-plastic material model. The results of investigations reveal that the Neuber method provides an upper bound limit, while the Glinka-Molski method results in a lower bound limit of strain amplitude. In the case of rotor heat grooves, both methods provide equally accurate results of notch strain amplitude and are suited to estimating lower and upper bound limits of low-cycle fatigue life under non-isothermal conditions.
The surface layers of low-carbon steel metal subjected to shot peening were studied. The velocity of Rayleigh surface waves of various frequencies in the range of 3-9 MHz by the phase-pulse method using contact piezoelectric transducers measured. The study of the distribution of residual...