The deleterious innate attribute of Ti6Al4V, the workhorse material among the alloy series of titanium is its incompetent tribo-behavior. Infinite surface modification techniques, viz., the accretion of adherent appendage layers, diffusion hardening, infusion of residual stresses, microstructural evolution, and phase transformations were attempted to enhance the wear resistance of the alloy. The need lies to establish a bridge between the indigenous material properties and the tribo-characteristics of Ti6Al4V so that the enforced improvement techniques can raise the barriers of its applicability. A critical review of the microstructural transitions, mechanisms governing tribo-behavior and the parametric conditions leading to material removal at dry sliding conditions of Ti6Al4V, falls under the scope of this manuscript. Hence, the prime focus of the approach is to impart a clear-cut perception of the minute variations in mechanical, metallurgical, and tribological characteristics of the alloy at interactive instances with distinct counter-body surfaces.
22 March 2021 in Materials and Manufacturing Processes
The demand for high temperature-resistant superalloys such as Inconel 718 is increasing rapidly, as they possess superior mechanical, chemical, and physical properties. Hence, these materials are highly adaptable for aerospace, nuclear, and marine applications. Nonetheless, during machining of such alloys, high temperatures develop at the interface region. It accelerates the tool wear and adversely affects the integrity of the prepared surfaces. Although conventional metalworking fluids are competent in normalizing/limiting the cutting-edge temperature, the environmental obligations and health issues to the workers have forced the manufacturing industry to move towards environment-friendly machining process, viz. dry machining. High-speed machining of Inconel 718 (under dry condition) can lead to the attainment of high cutting temperatures, thereby activating the mechanisms of built-up-edge (BUE) development and diffusion, leading to enhanced wear rate of tool. Besides, high temperatures can alter the integrity, infuse residual stresses, and promote crack generation/propagation on the processed surface. Therefore, the present paper contributes a detailed insight into heat generation during machining of Inconel 718 and its influence on various machining responses. Additionally, the work addresses multiple possibilities to reduce the cutting temperature with due emphasis on distinct machining methodologies, viz. dry, wet, and tool texturing. Abbreviations: BUE: Built-up Edge; AISI: American Iron and Steel Institute; AJM: Abrasive Jet Machining; AlTiN: Aluminium Titanium Nitride; Al2O3: Aluminum Oxide or Alumina; Al2O3/SiC: SiC whisker-reinforced alumina Al2O3 ceramic; Al2O3-TiC: TiC added alumina ceramic; AS: Conventional tool; AT-PA: Parallel grooves; AT-PE: Perpendicular grooves; AT-W: Wavy pattern; CaF2: Calcium fluoride; CBN: Cubic boron nitride; CBN-OR: Perpendicular to cutting edge; CBN-ORE : Perpendicular grooves 30 µm away from main cutting edge; CBN-PA: Parallel to cutting edge; CFT: Nano textured tool; CFT WS: Nano textured with soft coated WS2; CrN: Chromium Nitride; CT: Conventional cutting tool; DOC notch wear: Depth-of-cut notch wear; EBSD: Electron back scatter diffraction; ECM: Electrochemical machining; FCC: Face centered cubic; GWP: Global warming potential; HPC: High-pressure cooling; HPJ: High-pressure jet; HPJA: High-pressure jet assistance; HRSA: Heat-resisted super alloy; HSS: High-speed steel; IPF: Inverse pole figure; ISO: International organization for standardization; l/h: liter/hour; L/min: Liter/minute; Micro-EDM: Micro-electrical machining; MoS2: Molybdenum disulfide; MQL: Minimum quantity lubrication; MWFs: Metal-working fluids; NIOSH: National Institute of Occupational Safety and Health; PCBN: Polycrystalline Cubic Boron Nitride; PVD: Physical vapor deposition; SEM: Scanning electron microscope; Si3N4: Silicon nitride; ST: Graphite soft-coated tool; STT-F: Linear grooves on the flank surface; STT-R: Elliptical textures on the rake face; STT-0: Plain WC/Co carbide tool; STT-1: Elliptical grooves; STT-2: Parallel grooves; STT-3: Perpendicular grooves; TiAlN: Titanium Aluminium Nitride; TiCN: Titanium Carbonitride; TiN: Titanium Nitride; T-IPA: Perpendicular textures to chip flow; T-IPE: Parallel textures to the chip flow; T-PA: Texture surfaces inclined an angle to the chip flow; TT: Textured tool under dry condition; TT+SL: Textured tool under solid lubricant-assisted MQL cooling conditions; T1: Un-textured tool; T2: Texture tool having circular pit holes; T3: Hybrid texture tool combination of circular pit holes and linear grooves; TT: Textured inserts; TT: WS2-soft-coated WS2 textured tool; T1: Conventional insert; T2: Conical dimple-textured tool; T3: Square dimple-shaped insert; T4: Scratches provided on the cutting insert; T-1: Untextured insert; T-2: Pit holes textured insert; T-3: Hybrid textured insert; US: United States; USM: Ultrasonic Machining; WC: Tungsten carbide; WC–Co: Tungsten carbide-cobalt; WEDM: Wire electrical discharge machining; WS2: Tungsten disulfide
Nowadays, the titanium alloys observe broad applicability in aerospace, marine, automobile, and biomedical industries due to their lightweight, biocompatibility, good fatigue strength, and corrosion resistance. However, it possesses poor tribological behavior characterized by a high coefficient of friction (CoF) and the specific wear rate (SWR). In this paper, the impact of the electrical discharge machining on the tribological properties of Ti-6Al-4V (Ti64) was compared before and after the machining using a pin-on-disk tribometer under un-lubricated & ambient temperature. To comprehend the associated wear mechanisms; ex-situ analysis was performed on the pin surface using (i) scanning electron microscopy (SEM); (ii) energy dispersive X-ray spectroscopy (EDAX); and (iii) X-ray diffraction spectroscopy (XRD) techniques. The mechanical properties like nano-hardness and elastic modulus of the pin surface were also determined using a nano-indenter. Significant improvement in SWR (65.44 % reduction) with a passable compromise for CoF (22.5% increment) occurred during experimentation (before and after EDM) at 100 N. Besides, the wear behavior of the EDMed Ti-6Al-4V (ETi64) got evaluated at 200ºC, 400ºC and 600ºC under the applied loads of 50-150 N. At 400ºC and 600ºC, the SWR initially decreased and then increased with variation in load from 50-100 N and 100-150 N, respectively. The enhanced tribo-behavior at 100 N was due to the protective influence of tribo-oxides, viz. TiO2 and Ti8O15 assisted by the hard Ti24C15 carbides in the recast layer (RL).
1 August 2019 in Tribology - Materials, Surfaces & Interfaces
The tribological characteristics of coconut oil added with ceria-zirconia hybrid (Ce-Zr) nanoparticle additives are investigated using a sophisticated pin-on-disk tribometer. A chemical processing technique namely, precipitation method (PM) is used for the synthesis of Ce-Zr nanoparticles. High-end characterization practices using microscopy and spectroscopy analyses were utilized to determine their morphology, composition, and structure. A model was developed through the Response Surface Methodology (RSM) technique, in which the Box Behnken Design (BBD) was chosen to develop the experimental design. The extent of influence held by the various factors, viz. speed, load, temperature, and nanoparticle concentration (wt.%) were evaluated using distinct methods such as analysis of variance (ANOVA), regression analysis and normal probability distribution. The thermo-physical properties such as kinematic viscosity, flash, and fire point of the lubricant were also subject to examination for any possible improvement. The optimum concentration of Ce-Zr nanoparticles for maximum performance of the formulated fluid was determined to be 0.62 wt.%.