In a future intelligent factory, a robotic manipulator must work efficiently and safely in a Human–Robot collaborative and dynamic unstructured environment. Autonomous path planning is the most important issue which must be resolved first in the process of improving robotic manipulator intelligence. Among the path-planning methods, the Rapidly Exploring Random Tree (RRT) algorithm based on random sampling has been widely applied in dynamic path planning for a high-dimensional robotic manipulator, especially in a complex environment because of its probability completeness, perfect expansion, and fast exploring speed over other planning methods. However, the existing RRT algorithm has a limitation in path planning for a robotic manipulator in a dynamic unstructured environment. Therefore, an autonomous obstacle avoidance dynamic path-planning method for a robotic manipulator based on an improved RRT algorithm, called Smoothly RRT (S-RRT), is proposed. This method that targets a directional node extends and can increase the sampling speed and efficiency of RRT dramatically. A path optimization strategy based on the maximum curvature constraint is presented to generate a smooth and curved continuous executable path for a robotic manipulator. Finally, the correctness, effectiveness, and practicability of the proposed method are demonstrated and validated via a MATLAB static simulation and a Robot Operating System (ROS) dynamic simulation environment as well as a real autonomous obstacle avoidance experiment in a dynamic unstructured environment for a robotic manipulator. The proposed method not only provides great practical engineering significance for a robotic manipulator’s obstacle avoidance in an intelligent factory, but also theoretical reference value for other type of robots’ path planning.
Due to the narrow space and a harsh chemical environment in the sterilization processes for the end-effector of surgical robots, it is difficult to install and integrate suitable sensors for the purpose of effective and precise force control. This paper presents an innovative tension sensor for estimation of grasping force in our laparoscope surgical robot. The proposed sensor measures the tension of cable using fiber gratings (FBGs) which are pasted in the grooves on the inclined cantilevers of the sensor. By exploiting the stain measurement characteristics of FBGs, the small deformation of the inclined cantilevers caused by the cable tension can be measured. The working principle and the sensor model are analyzed. Based on the sensor model, the dimensions of the sensor are designed and optimized. A dedicated experimental setup is established to calibrate and test the sensor. The results of experiments for estimation the grasping force validate the sensor.
In order to sufficiently capture the useful fault-related information available in the multiple vibration sensors used in rotation machinery, while concurrently avoiding the introduction of the limitation of dimensionality, a new fault diagnosis method for rotation machinery based on supervised second-order tensor locality preserving projection (SSTLPP) and weighted k-nearest neighbor classifier (WKNNC) with an assembled matrix distance metric (AMDM) is presented. Second-order tensor representation of multisensor fused conditional features is employed to replace the prevailing vector description of features from a single sensor. Then, an SSTLPP algorithm under AMDM (SSTLPP-AMDM) is presented to realize dimensional reduction of original high-dimensional feature tensor. Compared with classical second-order tensor locality preserving projection (STLPP), the SSTLPP-AMDM algorithm not only considers both local neighbor information and class label information but also replaces the existing Frobenius distance measure with AMDM for construction of the similarity weighting matrix. Finally, the obtained low-dimensional feature tensor is input into WKNNC with AMDM to implement the fault diagnosis of the rotation machinery. A fault diagnosis experiment is performed for a gearbox which demonstrates that the second-order tensor formed multisensor fused fault data has good results for multisensor fusion fault diagnosis and the formulated fault diagnosis method can effectively improve diagnostic accuracy.
10 November 2025 in IEEE Transactions on Instrumentation and Measurement
Traditional Kalman filters (KF) struggle with heavy-tailed (HTMN) and non-stationary (NSMN) measurement noise. To address these issues, we propose two adaptive Kalman filters based on elliptically contoured (EC) distributions, enhancing the accuracy of state estimation. First, we develop a numerical fitting method to obtain the parameterized expression of the weighting function for the exponential elliptically contoured (EEC) distribution. Building on this method, we introduce a variational Bayesian adaptive Kalman filter based on EC distributions (VBAKF-EC) to effectively handle HTMN. By integrating VBAKF-EC into the interacting multiple model (IMM) framework, we propose another adaptive filter (IMM-VBEC) capable of autonomously selecting EC distributions for NSMN. The proposed VBAKF-EC under HTMN and IMM-VBEC under NSMN were evaluated in two independent target tracking scenarios. Relative to the top-performing comparison method in each scenario: VBAKF-EC (with EEC distribution) achieved a 2.1% reduction in average position error compared to the robust Student’s t-based KF (RSTKF), despite a 0.15% increase in average velocity error; IMM-VBEC reduced the average position error by 0.21% and average velocity error by 4.2% compared to the IMM filter with Pearson Type VII (IMM-PTVII). The proposed algorithms exhibit significant scalability for extension to heavy-tailed and non-stationary process noise.