The mesoporous carbon nanocube@mesoporous silica (mCNC@mSiO2) has a potential application as drug carriers because of its large surface area and low toxicity and biocompatibility. Hence, a...
The properties of a modified cement slurry based on degraded waste PET‐modified styrene‐acrylic emulsions are studied. The effects of the modified styrene‐acrylic emulsion on water consumption, setting time, retarding effect, water retention, impermeability, and mechanical properties of the cement slurry are comprehensively studied. The results show that the modified styrene‐acrylic emulsion has the following impacts on the cement slurry: it significantly reduces the water consumption required to reach a standard consistency, slows down the initial and final setting times, and greatly improves the water retention rate and water reduction rate. When the content of modified styrene‐acrylic emulsion is 7.5%, the water reduction rate is 36% and the water retention rate is 97%. The solidified cement slurry with a modified styrene‐acrylic emulsion content less than 7.5% has lower permeability and higher flexural strength than a common cement slurry. The compressive strength is reduced but can still reach required values. According to SEM observations, the modified styrene‐acrylic emulsion can enhance the bonding strength between the cement particles, reduce the porosity of the structure, and improve the performance of cement‐based composites.
19 April 2017 in Microscopy Research and Technique
Two type of hollow graphene microspheres were investigated for the adsorption performance of gaseous formaldehyde. Hollow gently reduced graphene oxide microspheres (HgRGOS) were synthesized...
17 November 2020 in Russian Journal of Inorganic Chemistry
The principal objective of this study is to evaluate the protective effect of cysteamine (Cym) against oxidation by chelating with metal cations. Cym–Zn complex has been prepared through a simple procedure using Cym ⋅ HCl and ZnSO4. The results have shown that the chelating efficiency of zinc is better when the molar ratio of the reactant Cym · HCl to zinc ions is 1.4–1.5. IR spectra of as-synthesized Cym–Zn complex suggests Cym cross-links with Zn through N and S atoms. X-ray powder diffraction analysis shows that the crystal structure is consisted of a coordination unit [Zn2(SC2H6N)3], a chlorine atom and an H2O molecule. Besides, the cell parameters of the monoclinic crystal are a = 7.9581(5) Å, b = 15.0794(10) Å, c = 12.2910(8) Å and β = 103°. Cym retention rate and thermal decomposition characteristics of Cym–Zn complex are significantly improved, and doping of iron, copper and manganese cations is helpful to suppress Cym oxidization because of the formation of stronger bonds with sulfur atom than zinc cation. The investigation indicates metal ion is an effective inhibitor for Cym oxidation.