In this study, the relationship between the extrusion ratio and the corrosion resistance of pure Mg deformed using extrusion with an oscillating die (KoBo) without preheating of the initial billet was investigated. The materials investigated in this study were extruded at high deformation ratios, R1 5:1, R2 7:1, and R3 10:1, resulting in significant grain refinement from the very coarse grains formed in the initial billet to a few µm in the KoBo-extruded samples at room temperature, which is not typical for hexagonal structures. Our research clearly shows that KoBo extrusion improves the corrosion performance of pure Mg, but there is no straightforward dependence between the extrusion ratios and corrosion resistance improvement. Although it was expected that the smallest grain size should provide the highest corrosion resistance, the dislocation density accumulated in the grain interiors during deformation at the highest extrusion ratio, R3 10:1, supports dissolution reactions. This, in turn, provides the answers for the greater grain size observed after deformation at R2 7:1, where dynamic recovery prevailed over dynamic recrystallization. This situation led to the annihilation of dislocation, leading to better corrosion resistance of the respective alloy. Therefore, the alloy with the greatest grain size has the best corrosion resistance.
22 December 2025 in Archives of Metallurgy and Materials
This review aims to explore the processing-structure-property relationship of Zn and Zn-based alloys developed for biodegradable cardiovascular stents. It assesses how conventional and advanced manufacturing techniques, including casting, extrusion, laser cutting, and additive manufacturing, affect the microstructure, mechanical performance, and degradation behavior of Zn-based materials. Particular emphasis is placed on the potential of additive manufacturing due to its ability to enhance microstructure, corrosion, and mechanical properties by adjusting the processing parameters and producing patient-specific stent geometries with enhanced precision and functionality. The review also addresses the unique processing challenges associated with Zn, such as high vaporization during laser processing. Additionally, the review identifies key knowledge gaps and outlines directions to support future research to advance Zn-based stents toward clinical translation as biodegradable cardiovascular stents.