Pin-fin and flat-tube heat exchangers (PFFTHXs) offer a promising alternative to traditional louvered-fin and flat-tube heat exchangers (LFFTHXs), especially when used as evaporators. The streamlined structure of pin fins helps to effectively remove condensate and defrost water. In this study, we conducted a numerical analysis of 60 different pin-fin configurations across three pin diameters to enhance heat transfer in PFFTHXs. Our investigation focused on how pin pitch affects both airflow and heat transfer efficiency. The results show that a closer pin pitch increases both the heat transfer rate per unit area and the pressure drop for a given airflow velocity. We evaluated the overall performance of these configurations using the heat transfer rate per unit frontal area obtained at equivalent fan power levels. The analysis identified optimal configurations for each pin diameter, with the 0.2 mm diameter configuration demonstrating the highest heat transfer efficiency—this was on par with louvered fins but used fewer resources. This makes it an ideal choice for evaporative applications in PFFTHXs.
Aerosols, generated and expelled during common human physiological activities or medical procedures, become a vital carrier for the transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). During non-contact intraocular pressure measurements, aerosols can be produced from the tear film on eyes and potentially convey the SARS-CoV-2 in tears, creating a high risk for eye care practitioners and patients. Herein, we numerically investigate deformation and fragmentation of the tear films with various thicknesses and surface tensions that are impinged by an air jet. Evolution of the tear films manifests several types of breakup mechanisms, including both the bag breakup and ligament breakup of tear film on the eyeball, the ligament breakup of tear film on the eyelid margin, and the sheet breakup near the eyelid margin. The sheet near the eyelid margin is critical for generating large droplets and can be formed only if the jet velocity is high enough and the film is sufficiently thick. A criterion based on Weber number and capillary number is proposed for the breakup of tear film into droplets in which three regions are used to classify the film evolution. Our results indicate that eyes with excessive tears have a greater probability of generating aerosols than eyes under normal conditions. We recommend that enhanced protections should be adopted upon measurement for the patients with watery eyes, and the time interval between two adjacent measurements for the same individual should be also prolonged during the COVID-19 pandemic.
In this study, the effect of audible acoustic fields on heat transfer in crossflow heat exchangers is investigated using numerical simulations. The research focuses on improving heat transfer efficiency and reducing energy dissipation. The results show that audible sound fields are more effective than ultrasonic fields in maintaining heat transfer enhancement over longer distances. In particular, the use of vertical and 30° angular configurations of the acoustic transducer provided remarkable heat transfer enhancement ratios of up to 82.6% and 112%, respectively, at the lowest heating power compared to conventional crossflow. The investigation details the mechanisms by which audible sound influences fluid flow and temperature fields, and examines parameters such as crossflow velocity, acoustic intensity, frequency, distance, and transducer angle. This provides valuable design insights and demonstrates the potential of acoustic assisted heat transfer to improve energy utilization and thermal performance in heat exchangers.
Aerosols, generated and expelled during common human physiological activities or medical procedures, become a vital carrier for the transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). During non-contact intraocular pressure measurements, aerosols can be produced from the tear film on eyes and potentially convey the SARS-CoV-2 in tears, creating a high risk for eye care practitioners and patients. Herein, we numerically investigate deformation and fragmentation of the tear films with various thicknesses and surface tensions that are impinged by an air jet. Evolution of the tear films manifests several types of breakup mechanisms, including both the bag breakup and ligament breakup of tear film on the eyeball, the ligament breakup of tear film on the eyelid margin, and the sheet breakup near the eyelid margin. The sheet near the eyelid margin is critical for generating large droplets and can be formed only if the jet velocity is high enough and the film is sufficiently thick. A criterion based on Weber number and capillary number is proposed for the breakup of tear film into droplets in which three regions are used to classify the film evolution. Our results indicate that eyes with excessive tears have a greater probability of generating aerosols than eyes under normal conditions. We recommend that enhanced protections should be adopted upon measurement for the patients with watery eyes, and the time interval between two adjacent measurements for the same individual should be also prolonged during the COVID-19 pandemic.